12A Engine
#1
Full Member
Thread Starter
Join Date: Feb 2002
Location: Columbia, SC
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
12A Engine
Greetings!
I'm considering an '84 project that needs a new motor, and was curious as to how much I could get one for, either running or needing a rebuild, etc...
I'm new to the FB section, owned two FCs previously, so go easy on me.
All help appreciated!
Hester
I'm considering an '84 project that needs a new motor, and was curious as to how much I could get one for, either running or needing a rebuild, etc...
I'm new to the FB section, owned two FCs previously, so go easy on me.
All help appreciated!
Hester
#2
Rotary Enthusiast
iTrader: (8)
Join Date: Mar 2004
Location: Ontario
Posts: 1,036
Likes: 0
Received 0 Likes
on
0 Posts
take a look at thise sites they might help you out
http://www.srmotorsports.com/index.html
http://mazdadragracing.com
what makes you think you need a new motor?
http://www.srmotorsports.com/index.html
http://mazdadragracing.com
what makes you think you need a new motor?
#6
You can usually find running used engines (with owner's claims that they "run strong", etc) anywhere from $250 to $750, with $4-500 being the average. Check this and other forums, thepartstrader.com, ebay, etc.
Rebuilt engines on the sites listed above are about $1700 plus, depending on warranty, mods such as porting, etc.
Basic rebuild kits for the do-it-yourselfer are in the $800-1000 range.
Hope this helps.
Rebuilt engines on the sites listed above are about $1700 plus, depending on warranty, mods such as porting, etc.
Basic rebuild kits for the do-it-yourselfer are in the $800-1000 range.
Hope this helps.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post