12a to a 13b swap
#1
Junior Member
Thread Starter
Join Date: Apr 2004
Location: Layton ut
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
12a to a 13b swap
I am just wandering what all that I would need to swap out the 12a in my 82 and drop in a 13b out of the 86 that I am getting this weekend. Is there anytype of extra parts that I would have to get to do that???
#2
You have to swap the front cover from your 12a on, get a gsl-se oil pan, slot the motor mounts (or buy motor mount adapters).
Are you going to run carb or FI? Carb is an easier swap, but with fi you will need a high pressure fuel pump, ecu, wiring harness, etc....
It isn't a huge job, but not a simple task by any means.
There is a search button at the top right of this website, you will find a lot more info if you search. I also recommend you read the FAQ sticky as well as take a browse through the archives. Welcome to the forum!
Marques
Are you going to run carb or FI? Carb is an easier swap, but with fi you will need a high pressure fuel pump, ecu, wiring harness, etc....
It isn't a huge job, but not a simple task by any means.
There is a search button at the top right of this website, you will find a lot more info if you search. I also recommend you read the FAQ sticky as well as take a browse through the archives. Welcome to the forum!
Marques
#3
Junior Member
Thread Starter
Join Date: Apr 2004
Location: Layton ut
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
it is going to be FI, so basicly I need a GSL-SE oil pan, motor mount adapters, new fuel pump ecu and wiring harness??? ok I am taking this out of a running 86 an puting it in my 82 wouldn't some of those parts be on the 86 could I just use those??? Sorry if the questions sound stupid..
#4
FCs use an in tank fuel pump, FBs use an in line fuel pump. The wiring harness and ECU will swap right over from the 86. I am unsure if the exhaust will bolt up, somebody else will know that.
Marques
Marques
Thread
Thread Starter
Forum
Replies
Last Post
sleepydogz
Old School and Other Rotary
8
10-04-15 03:46 PM