1/4 window re-installation
04-07-17, 08:29 PM
#1
Senior Member
Thread Starter
1/4 window re-installation
Please tell me how to install these things. I have no clue how to get them to sit right. Do you use a Butyl snake? How thick?
Thanks,
Herb
Thanks,
Herb
04-07-17, 08:36 PM
#2
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,841
Received 2,604 Likes
on
1,847 Posts
well aligning it is pretty easy. the front has a 6mm threaded stud that goes through a hole in the body, and the rear has a metal tab that sits over a screw hole.
you do need some window sealant, not sure how thick, although it is probably in the shop manual. failing that there are rubber weather strips on the window, and those should sit flush with the body
you do need some window sealant, not sure how thick, although it is probably in the shop manual. failing that there are rubber weather strips on the window, and those should sit flush with the body
