RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   1st Gen General Discussion (https://www.rx7club.com/1st-gen-general-discussion-207/)
-   -   Your Dream FB (https://www.rx7club.com/1st-gen-general-discussion-207/your-dream-fb-656218/)

brett1621 05-28-07 08:35 PM

2 Attachment(s)
here are a couple more pics of the interior...

C. Ludwig 05-29-07 06:30 AM


Originally Posted by ducktape (Post 6981497)
It was James Duncar's car, and used to have the whale tale. Legend has it that it was hit by a cop car, and all the magnificent body work was paid for by Louisville Metro.

The user on here is "Malambry", and he's a pretty cool guy. I PM'd him a while back and he sais the car is still running, and is getting a motor built by Ludwig.

I told him he should bring it out to the autocross!


404 Malambry not found...

It's Maguire. And the engine was done about a year ago. He has autocrossed it.

OneRotor 05-29-07 08:25 AM

'82 base model
Titanium Grey from the Spirit R
Mariah GTO widebody
TII subframe with TII suspension (dont' they come with aluminum arms?)
9" from Granny's with 4.10's and a clutch LSD
5x114.3 lug pattern
18x12 CCW Classics, black center, polished lip
Richmond T56
lightened and balanced rotating assembly
triple plate carbon clutch
9lb Aluminum flywheel
aluminum sideplates from Racing Beat
5" full exhaust
coilovers
camber plates
back halved with a 4 link
Extend Port 20b
GT42R 1.00 or 1.15 A/R
biggest brakes that will fit under the wheels
huge master cylinder
Motec
and the list goes on.

dbragg 05-29-07 08:42 AM

a few options:

all of which are SAs cause everyone knows SAs are hotter;)

silver SA with datsun flares left black. ALL kinds of goodies suspension wise, too many to list. full 5 lug suspension swap with SE rearend. SE rearend built to its absolute strongest point; moser axles, kaaz diff, some form of treatment to the gears to make them mucho mucho stronger. with some 16x7 and 16x8 gold SSR reverse mesh wheels. for the power plant, its either be a 4 port 13b ported and boosted, a NA ported 20b, a lightly boosted 20b, SR20DET, or LS1.

the other option is the same as above except with the very rare pacifica widebody kit instead of the flares. with some bigger wheels.

luiml73 05-29-07 09:04 AM

RIP

http://img512.imageshack.us/img512/8...030b0husb5.jpg

vipernicus42 05-29-07 04:27 PM

Which dream FB? I've got three!

They all start with an S3 FB base which gets completely stripped to the metal inside, outside and upside down and then painted back as close to a "factory" finish as possible. Interiors are stock S3 grey interiors, though one of them would probably end up with some sort of racing-specific seats and quite a bit of weight reduction for interior. The main reason I have three is because there are three powerplants and three paint colours that I really like, so I don't think I'd be able to choose between them if I had an unilmited supply of money. I'd just have to build 'em all.

The Underdog:
This is the daily cruiser. The fun but reliable N/A that doesn't chug premium gas like it's going out of style. Nearly twice as powerful as stock, it cruises along under a cloak of near-stock stealth, awaiting it's next unsuspecting victim. It's also basically the car I'm building right now.

Paint: K3 - Sunbeam Silver Metallic
Engine: The Ultimate Streetable 12a
Drivetrain: Stock S3 tranny, miata torsen diff, mazdatrix driveshaft
Suspension: RB Springs, KYB GR-2 Gas Shocks, Poly bushings front, Rubber bushings rear, Front RB sway bar, stock rear swaybar (or no swaybar, haven't decided yet)
Brakes: Stock 4wheel GSL discs, TII Brake Booster and master cyl, stainless steel lines, Hawk HPS brake pads
Fuel: Mallory Comp 70 Fuel pump, Holley 1-4psi FPR, ReSpeed fuel pressure gauge, standard rubber hoses
Ignition: 2nd gen coil with TT box until someone devises a way to create a small, simple iginiton control computer to use a 2nd Gen CAS in an FB
Intake: Sterling Carb, ported intake mani, ISCRacing Airbox
Cooling: Aluminum Rad (as yet unspecified), 2nd Gen FMOC, e-fan with thermoswitch
Steering: Completely NEW stock components (until someone comes out with something better.
Electrical: 2nd Gen Fuse Box, Non Sealed-beam headlights with replaceable bulbs, headlight relay, brand new hand-made copper battery wires with larger gauge, FD Alternator and dual pulley
Exhaust: RB Street Port exhaust system
Cosmetics: Dan Atkins clear corner lenses, IoTus clear taillights, '83LE rims with black powdercoated centres and polished lips, Rubberized "euro sport" antenna, smoked glass sunroof
Tires: Sumitomo HTR200s
Sound: Infinity Kappa 63.7i rear speakers, Infinity Kappa 52.7i front speakers, Infinity Reference 8" sub (x2) in custom rear enclosures between back of hatch and taillights, Infiinity reference 4channel amp for speakers, Infinity reference sub amp, Nakamichi CD300 deck, Akiratdk stereo surround with 3-guage cluster
Other: Water Temp, Oil Temp and Oil Pressure gauges mounted in Akiratdk stereo surround. 2x Wideband O2 sensor (one in each pipe of RB system so 1 per rotor), gauges mounted on pillar-gauge pod, and space-age sound deadening everywhere.


The Turbo
This is a track/road car. It guzzles premium with reckless abandon, has suspension that you wouldn't want to take on old country roads for fear of your internal organs protesting, and it's louder than the UnderDog, but you *can* take it on the street. Since I'm not a "balls-to-the-wall" racer (yet) I opted to keep this streetable instead of making a 100% track car, so it will have a few amenities not usually found in full-out race cars. For example, a passenger seat (removable though) and a stock dash.

Paint: Either A7, AY, U2, DP, V3, or L6 (see chart)
Engine: Probably a highly modified S4 or S5 13b with TII irons but N/A high comp rotors, a methanol injection system, large intercooler, some sort of upgraded turbo, engine management system (probably haltech), and whatever port job works well for turbos.
Drivetrain: I don't know a lot about transmissions, so I'll tentatively say a "dogbox" since I've heard that name thrown around as an expensive race tranny that's strong and fast to shift. Since it's a power car, I'd probably be going Ford 9" rear and have some sort of different suspension setup that doesn't suck nearly as much as the watt's link and control arms do.
Suspension: Eibach springs and Tokico blue adjustible shocks, poly bushings front, rubber rear, probably RB front sway bar, a strut tower brace that also braces against the firewall, coilovers, adjustible end links, and those things that you mod the strut tower for to let you adjust your alignment
Brakes: front and rear TII big brake conversion with 4-pot calipers, Hawk pads
Fuel: Whatever kicks ass for a high comp turbo motor
Ignition: handled by the haltech, probably using 3 MSD boxes like DF's car has
Intake: Again, not my forte... but sounds like upgraded injectors and some sort of porting or modification of the intake would be necessary
Cooling: Aluminum rad, good e-fan, temp sensor should be the screw-in variety not the between-the-fins variety
Steering: Again, same as above unless something better appears
Electrical: same as above but add in whatever is necessary for the fuel and ignition control
Exhaust: since the turbo has a single downpipe, it'll probably have to be some sort of custom system that allows enough flow
Cosmetics: *functional* body kit, to keep it on the ground at higher speeds. Hopefully something that looks awesome too. Probably no sunroof. Fiberglass or CF wherever I can put it.
Tires: Probably a set of tires specifically for racing and another set for city driving
Sound: minimalist. Just a deck and 4 speakers powered from the deck. Enough to keep it rockin' when not at the track
Other: Racing seat of some sort, racing steering wheel, stripped interior, and all the various gauges needed to keep a good turbo car running


The Beast
I've always wanted a 20b or 4-rotor engined car, so that's what this car is. I've also wanted a supercharged car, so why not go all-out and have a supercharged, ported 20b? Since this car has power to spare, I don't bother with the weight reduction. It's a full car, including space-age sound deadening and an awesome sound system like the UnderDog has and a full interior.

Paint: H1 - Sparkling Black Metallic
Engine: Ported, built up Cosmo 20b... Maybe a supercharger, why the hell not
Drivetrain: something that can handle TORQUE... Dogbox?
Suspension: See "The Turbo"
Brakes: See "The Turbo"
Fuel: I get the feeling this will need a massive fuel system. SS Lines of large diameter and good in-tank pump or two is a must
Ignition: Gotta be some sort of custom awesomeness that's computer controlled
Intake: Whatever gets as much air as possible in.
Cooling: Whatever it takes to keep a super 20b cool
Steering: See "The UnderDog"
Electrical: See "The Turbo"
Exhaust: Custom Biggass exhaust
Cosmetics: Maybe a widebody kit, because a car with this kind of power and torque under the hood screams "I'm a big bugger that's coming to kick your ass"
Tires: BIG.
Sound: This is where the "Screw the hatch area, let's strike some fear into their hearts" sound system would come in
Other:

woodonastick 05-29-07 10:52 PM

the red swedish widenbody fb but with a peripheral 20b.

Mazda RX-7 EFINI TYPE 05-30-07 03:34 PM

http://www.mrmodels.co.nz/New_Upload...X7_Series1.jpg

My dream FB is pretty much this...but in black, with gold bolts holding on the fenders, and droppped on gold BBS rims (15s or so). And boosted of course.

dj55b 05-30-07 04:26 PM


Originally Posted by kenn_chan (Post 6986003)
Well it would be a FB body vice the SA, with the FC front crossmember conversion, a 13bt with a decent turbo on it of course with the trans, etc. a wide body kit, prefer the JSS but would accept the Mariah, and a nice fat set of watanabes on it, in a nice deep green color. Oh and it needs one of them hot a$$ Latino, or Asian hotties in the passenger seat.

cheers

kenn

Oh wait whats that, it must be my dream car almost finished! :shocking:

Now wheres the Girl?????:wallbash:


You really need to get some high quality pictures of that beast ... with a latino chicka por favor :D

Markusr2001 05-30-07 05:19 PM

3 Attachment(s)
:rock: I want this car.

sly-sa22c 05-30-07 06:01 PM


Originally Posted by Mazda RX-7 EFINI TYPE (Post 6992585)
http://www.mrmodels.co.nz/New_Upload...X7_Series1.jpg

My dream FB is pretty much this...but in black, with gold bolts holding on the fenders, and droppped on gold BBS rims (15s or so). And boosted of course.

are those plaid seats? :lol:

fkn hot though!

Mazda RX-7 EFINI TYPE 05-30-07 07:04 PM

LOL...yea...could do without the plaid seats...but the kit just turns me on...lol.

Kenku 05-31-07 12:24 AM

Hrm, dream (or "next" depending on how you look at it) is built to old GTU specs; as close to Team Highball's '86 Daytona car as possible. Peripheral 12A, widebody, whaletail, etcetera. Built to SVRA specs because, well, what's the point if you can't roadrace it?

Current project's doing about everything that I want in a street car. S5 internals in... well, let's just say bigass streetported irons, ITBs, trilink and panhard, 5-bolt conversion (T2 rotors of course), Wilwood 4-pots up front, non-assist dual master cylinder brake setup, Bilstein struts / shocks. No, not the P30-0104 inserts. Heh heh heh. This is, of course, ignoring little bits and pieces.

Manntis 05-31-07 12:48 AM

Pamela.

RIP.

Mazda RX-7 EFINI TYPE 05-31-07 01:47 PM

1 Attachment(s)

Originally Posted by Mazda RX-7 EFINI TYPE (Post 6992585)
http://www.mrmodels.co.nz/New_Upload...X7_Series1.jpg

My dream FB is pretty much this...but in black, with gold bolts holding on the fenders, and droppped on gold BBS rims (15s or so). And boosted of course.

My picture disappeareddd...lol.

TiViD 05-31-07 02:26 PM


Originally Posted by Directfreak (Post 6986149)
Dude, you need to take like 1000 pictures of that car and post them up pronto!!!

Agreed! Im pretty sure ive seen a ton of pictures of it before randomly on the internet, but i knew it was no ones here on the forum...until now!

djjjr42 06-01-07 07:08 PM


Originally Posted by brett1621 (Post 6986246)
here are a couple more pics of the interior...

Holy guacomole that's hot! More pics in & out please:icon_tup:

innertwist 06-02-07 12:29 AM

ahhh, dreams....

1980 RX-7, skymaster blue with metallic chip (nightime sky effect)
S3 front end
front air dam
slight and discreet fender flares all around
slim whale tail
13B Renesis, the 9k happy version, forified to run above 10k (N/A would be ok... at first)
with three shiny sequential two barrel carburators! (no one said it had to make sense) well, maybe not
5 lug FC front suspension swap with quad calipers
custom double wishbone independent rear suspension with a torsen LSD (squeezing a TII rear in would be acceptable)
What better wheels for an RX-7 than BBS RX wheels? 205s on 8 inch wide rims
adjustable coilovers make sense, but a coil on adjustable airbag suspension would be awesome. Change stance on the fly and let the car jump
Toyota Getrag V160 or V161 transmission, adapted to fit
custom aluminum driveshaft
almost stock black SA interior
79' 130mph speedo, 12k tach in stock location with stock coloring
rear +1 seat, with speakers in molding on sides
Clarion gutted to house wifi/cellnet/gps/bluetooth enabled computer with digital tuner, knobs still functional though
slurpy style cdrom in tape deck location
fold fown 7" LCD screen, touchpad integrated into top of ashtray, a GUI that can be run keyboardless
foldable bluetooth keyboard in glove box, for those ops that no GUI is good for
extra gauges, with oil pressure and voltmeter at the top of the list, displayed on LCD
two cup holders in front, somewhere, one for the rear too
adjustble and fully collapsable steering wheel to compliment the seats that fold into a bed, onboard AI, four directable jet engines in the underbody plus two at the rear, sealed chamber rebreather system, submersible mode, refinery in location of the gas tank to convert trash into hydrogen...

EDIT: 205s are big enough. :-P

WAS:12A 06-02-07 01:21 AM

My dream FB would be either a Black widebody version with full fuel injected bridgeport like my old car, or a turbo set up like my current car:


http://img396.imageshack.us/img396/5...weekkn3.th.png

Cam...

Manntis 06-02-07 01:38 AM

^ is vair' nice

JDuncan 06-08-07 09:52 PM


Originally Posted by ducktape (Post 6979597)
https://www.rx7club.com/attachment.p...2&d=1136234748

This with slight flares, and a Cosmo RE. Some day, when money is no object...

Yet another SA that I never should have sold... At least Sean loves this one and treats it right. My 80 ended up in the crusher within 2 years of me letting it go....

:(

JDuncan 06-08-07 09:53 PM


Originally Posted by peejay (Post 6984940)
My dream FB is not an FB, it's an SA. FBs are ugly.

Truer would have not been quoted. :)

sittinlow88 06-08-07 11:29 PM

My dream car is my 85' V8 powered SE....I know its a V8 and a lot of you guys dont like that (you actually hate that!!) but its what I know how to work on and I love it!!!
http://i151.photobucket.com/albums/s...w88/driver.jpg
http://i151.photobucket.com/albums/s...ow88/motor.jpg

sittinlow88 06-08-07 11:29 PM

Ha Ha....I posted the same pic thats in my sig. lol

84FBVRT 07-05-07 07:08 PM

My FB
 
1 Attachment(s)
Ah, what a beatiful car them FBs are.

This one is mine, an 84 12A with 285000 kms (you can turn the engine by turning the alternator wheel), but the damm thing still runs! In terms of upgrades, my knowledge and budget rather limit the upgrades, but, its got a header and almost straight-piped, some 8mm NGK sparkwires, a custom hood vent and a custom spoiler, and a temporary switch start and 14" Carroll Shelby rims (Which I think theyre kinda rare, I have that 4x110 pattern). Also took out all the carpet and radio and whatnot.
My dream? SOmehow make the 12A (a new one) more powerful, and make my own body kit for it...


All times are GMT -5. The time now is 11:59 AM.


© 2024 MH Sub I, LLC dba Internet Brands