Good morning I need help please , my Mazda 1st Gen comes with your standard 13x5.5 rims but I want to replace with a set of 14x5.5 rotary design rims , is this possible ?

 

should be fine

 

thank you for the help I really appreciate it.

 

The rotor wheels are made by Mazda and will work with an 79-85 RX-7 as long as its not the GSL-SE. The bolt pattern is different on the SE.

 

Bolt patterns for SA and FB (various 13×5.5" and some 14×5.5" stock wheels): G / GS / GSL = 4×110.

Bolt pattern for GSL-SE (14×5.5" stock wheel sizing) = 4×114.3, 40mm offset.

These are not interchangeable for obvious reasons.

 

In case anyone isn't familiar with the Rotor Rims....

 

Rotary design rims 13x5,5 4x110 with 185/70/13