i need to replace the window seal to both the driver and passenger windows. i was wondering if anyone on here knows the best place to get the replacement. should i go to Mazda or auto-zone does fine. im guessing it should be an easy job. do u guys recommend doing yourself or getting it done at the shop?

 

I would check with Black Dragon.

ps... you may be my twin!

 

I get the OEM ones from Mazdatrix. Not cheaper. Much higher quality.

 

i always go to the dealer and get the window seals. as Ron explained, they are more expensive but they fit perfectly and they will last another 20 years. the black dragon seals don't fit perfectly and they have a tendancy to dry out much quicker.

 

Do it yourself - I did and there is no one LESS handy with a wrench. Presume we are referring to the window _CHANNEL_ seals? Old ones will just pull up and out with no drama (window wound down of course). Might be a bit dodgy forcing the new ones down the window tracks, tho some lube (even WD40) might make this a snap. Worse case you pull the door panels, peel back the clear plastic weather shield, and reach in and guide the seals down the channels. A pain but not rocket science.

FWIW you probably need the "Weatherstrip, Outer Joint" pn 8871-58-781 and "...Inner Joint"
pn 8871-58-791
These are the rubber strips that sit both sides of the window on the BOTTOM of the window frame (ie top of the actual door). These may be worn too. You can see the OUTER one so judge for yourself.

Stu Aull
80GS
Alaska

 

Get OEM parts.....they are the only ones that seem to fit. Cheapest place i could find for them is http://www.yourcarpart.com/ They have great pricing. Only problem is you have to have the part number to find anything.

 

Niceeeee

 

i used the parts numbers (pn 8871-58-781 and pn 8871-58-791) and serached on www.yourcarpart.com. i think i found them but i didnt see a picture and i want to know if those are the right kind or if the quality is good. please let me know thanks

 

niceeeee car man

 

(pn 8871-58-781 and pn 8871-58-791) Those are the part numbers for the inner and outer window seals that sit on top of the doorskin (bottom of window when closed)....if thats the parts you need, you are correct. The parts are genuine Mazda....your originals lasted 30 years...so they are golden....

 

here are some pictures of what i need lol i just want to make sure i understand what parts is what. i want to fix the gap where the water is getting in and messing things up.

if i could get the part number for these please.

1.?
2.? (goes around the whole window, this broke a few weeks ago and part of it fell in the
window. whenever i close the door the window ratels cuz its not in a snug fit)
3.?
4.?(if needed, idk if it needs to be replaced)

it looks like the best place to get these parts is www.yourcarpart.com

a bunch of thanks for your help guys

 

1=8871-58-781-both
2=8871-58-605A - both
3=8871-59-760 (L, driver)
3=8871-58-760 (R, pass)
4=8871-58-791 -both

dood - you need to get a download PDF parts catalogue

Stu Aull
80GS
Alaska

 

Stu is right. Download the parts fische and you can identify all your parts. Generally, the oem seals, which are still available, are more expensive but the fit and quality are also better. New door seals make a lasting and positive impression cause you inneract with them every time you open or close your door.

 

here is a link to the service and parts manual downloads:

http://rx7.foxed.ca

 

thanks man! ya i know. Where can i get that catalogue :P

i already saved the manual

 

btw "2=8871-58-605A - both" wasn't found in the search in www.yourcarpart.com

 

get the manuals through here: http://rx7.foxed.ca

I buy all my mazda parts here: http://onlinemazdaparts.com/

 

weird, because these parts are still available!

Stu Aull
80GS
Alaska