replacement part help
#1
Full Member
Thread Starter
replacement part help
i need to replace the window seal to both the driver and passenger windows. i was wondering if anyone on here knows the best place to get the replacement. should i go to Mazda or auto-zone does fine. im guessing it should be an easy job. do u guys recommend doing yourself or getting it done at the shop?
#5
RX HVN
iTrader: (2)
Do it yourself - I did and there is no one LESS handy with a wrench. Presume we are referring to the window _CHANNEL_ seals? Old ones will just pull up and out with no drama (window wound down of course). Might be a bit dodgy forcing the new ones down the window tracks, tho some lube (even WD40) might make this a snap. Worse case you pull the door panels, peel back the clear plastic weather shield, and reach in and guide the seals down the channels. A pain but not rocket science.
FWIW you probably need the "Weatherstrip, Outer Joint" pn 8871-58-781 and "...Inner Joint"
pn 8871-58-791
These are the rubber strips that sit both sides of the window on the BOTTOM of the window frame (ie top of the actual door). These may be worn too. You can see the OUTER one so judge for yourself.
Stu Aull
80GS
Alaska
FWIW you probably need the "Weatherstrip, Outer Joint" pn 8871-58-781 and "...Inner Joint"
pn 8871-58-791
These are the rubber strips that sit both sides of the window on the BOTTOM of the window frame (ie top of the actual door). These may be worn too. You can see the OUTER one so judge for yourself.
Stu Aull
80GS
Alaska
#6
Get OEM parts.....they are the only ones that seem to fit. Cheapest place i could find for them is http://www.yourcarpart.com/ They have great pricing. Only problem is you have to have the part number to find anything.
i need to replace the window seal to both the driver and passenger windows. i was wondering if anyone on here knows the best place to get the replacement. should i go to Mazda or auto-zone does fine. im guessing it should be an easy job. do u guys recommend doing yourself or getting it done at the shop?
Trending Topics
#8
Full Member
Thread Starter
i used the parts numbers (pn 8871-58-781 and pn 8871-58-791) and serached on www.yourcarpart.com. i think i found them but i didnt see a picture and i want to know if those are the right kind or if the quality is good. please let me know thanks
#10
(pn 8871-58-781 and pn 8871-58-791) Those are the part numbers for the inner and outer window seals that sit on top of the doorskin (bottom of window when closed)....if thats the parts you need, you are correct. The parts are genuine Mazda....your originals lasted 30 years...so they are golden....
i used the parts numbers (pn 8871-58-781 and pn 8871-58-791) and serached on www.yourcarpart.com. i think i found them but i didnt see a picture and i want to know if those are the right kind or if the quality is good. please let me know thanks
#11
Full Member
Thread Starter
here are some pictures of what i need lol i just want to make sure i understand what parts is what. i want to fix the gap where the water is getting in and messing things up.
if i could get the part number for these please.
1.?
2.? (goes around the whole window, this broke a few weeks ago and part of it fell in the
window. whenever i close the door the window ratels cuz its not in a snug fit)
3.?
4.?(if needed, idk if it needs to be replaced)
it looks like the best place to get these parts is www.yourcarpart.com
a bunch of thanks for your help guys
if i could get the part number for these please.
1.?
2.? (goes around the whole window, this broke a few weeks ago and part of it fell in the
window. whenever i close the door the window ratels cuz its not in a snug fit)
3.?
4.?(if needed, idk if it needs to be replaced)
it looks like the best place to get these parts is www.yourcarpart.com
a bunch of thanks for your help guys
The following users liked this post:
toddk042 (01-01-20)
#13
Happy Rotoring!
iTrader: (13)
Stu is right. Download the parts fische and you can identify all your parts. Generally, the oem seals, which are still available, are more expensive but the fit and quality are also better. New door seals make a lasting and positive impression cause you inneract with them every time you open or close your door.
#15
Full Member
Thread Starter
#16
Full Member
Thread Starter
btw "2=8871-58-605A - both" wasn't found in the search in www.yourcarpart.com
#17
Rotary Freak
iTrader: (19)
Join Date: Oct 2007
Location: Colorado Springs, CO
Posts: 2,014
Likes: 0
Received 0 Likes
on
0 Posts
get the manuals through here: http://rx7.foxed.ca
I buy all my mazda parts here: http://onlinemazdaparts.com/
I buy all my mazda parts here: http://onlinemazdaparts.com/
Last edited by Sgt Fox; 11-03-11 at 01:45 PM.
#18
RX HVN
iTrader: (2)
btw "2=8871-58-605A - both" wasn't found in the search in www.yourcarpart.com
Stu Aull
80GS
Alaska
Thread
Thread Starter
Forum
Replies
Last Post
KAL797
Test Area 51
0
08-11-15 03:47 PM