project 84gs (engine pull)
Trending Topics
And here is a quick question for anyone who knows the answer. Has anyone ever seen a GX model 1st gen. The parts car we just picked up has GX badges on the B-pillars. It looks just like a GSL. It has rear discs and lsd, and all the power options on the interior.
Sounds like the project I have lined up when the weather decides to stay nicer.
60* this weekend, 30* and snowing right now in NY.
After pulling a motor out of a Cherokee, this seems like its going to be nothing, haha.
60* this weekend, 30* and snowing right now in NY.
After pulling a motor out of a Cherokee, this seems like its going to be nothing, haha.
Took the engine out of the donor car last night. All was well until I figured out that the wire harness`s where actually different on both motors. I switched the harness over from the old engine everything should work out. The harness on the 84GS came out of the firewall on the passenger side, and the harness from the 83GX came out of the driver side. The main plugs where acctualy different as well. Engine should be going in this weekend.
The engine out of the donor car is finally in the 84. Took a while since I only had the front hook on the motor and it was a little hard to line up with the trans. All I have left to do is top up the fluids, and play with the idle adjustments on the carb, she revs a little high at the moment.
Thread
Thread Starter
Forum
Replies
Last Post
CaptainKRM
2nd Generation Specific (1986-1992)
14
Aug 26, 2015 09:52 PM
maikelc
3rd Generation Specific (1993-2002)
8
Aug 24, 2015 11:04 AM










