My new toy
#1
Got Rotors?
Thread Starter
iTrader: (1)
Join Date: Jul 2005
Location: Statesville, NC
Posts: 856
Likes: 0
Received 0 Likes
on
0 Posts
My new toy
I just bought a second 7 today. I have a 79' that has been my project for the last few years. I'm getting close to being done and did not plan on getting another, but its hard to pass up a good deal. The car i got was from a guy my dad has known for years. He bought his 80' back in 84 and has kept it garaged its entire life. The car has 126xxx miles and has sat for 6 years. I went to pick it up today, and the guy could not find his title but let me go ahead and get it to start working on it. He has to apply for a lost title so i cant take it out yet on the road, but still can do alot of work on it before i need to do that. Once i got it home i checked the fluids, and made sure the engine was not locked up. Once that checked out i put a battery in it gave it a drink of gas down the carb and first bump of the starter it cranked. It will idle with gas being dumped down its throat, but i have to get the tank flushed out and a new filter. I hope to have it cleaned up and running by the end of this weekend. I'm not sure what im going to do with this one yet, time will tell. Here are some pics of my $500 80' all original, 3rd owner car.
#5
Zuuuummmmm Zuuuummmmm
Join Date: Oct 2006
Location: King, NC
Posts: 1,450
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#8
Zuuuummmmm Zuuuummmmm
Join Date: Oct 2006
Location: King, NC
Posts: 1,450
Likes: 0
Received 0 Likes
on
0 Posts
#10
Got Rotors?
Thread Starter
iTrader: (1)
Join Date: Jul 2005
Location: Statesville, NC
Posts: 856
Likes: 0
Received 0 Likes
on
0 Posts
Yeah i have a 79 that has a rebuilt streetport, and mechanical is pretty well off on the up grades but the interior is GONE. I figured if i could not get it running or if the engine was junk i could atleast take the 2 am make one good one. But after getting the car busted off i think i will be spending time getting them both done.
im pretty excited about this project just because of where i have to start. yeah its fun bringing one back from the beyond but to start with something this well off to begin with is nice. The only interior issue is on the driver seat there is a little separation at the stitches in one area and the dash is cracked a bit but other then that its CLEAN
#12
shut up you jack wagon
Man that's clean,What are the plans for the motor.Is it going to stay stock,or what.A set of 5letter wheel's would look nice,but that's my upen..great find
#14
Got Rotors?
Thread Starter
iTrader: (1)
Join Date: Jul 2005
Location: Statesville, NC
Posts: 856
Likes: 0
Received 0 Likes
on
0 Posts
IM not sure if i will leave it stock or not, depends if the engine in it has good compression or not. If it does i will most likely leave it stock for now but if it appears to need some attention then im pulling my streetport 12a out of the 79 and putting it in this one. Then i will take the 80 engine and build it for my 79. it is up in the air right now, but i will keep it posted
#17
Too old to act my age
Join Date: Feb 2005
Location: Tulsa, Ok.
Posts: 3,164
Likes: 0
Received 0 Likes
on
0 Posts
Nice find. If it were me, I'd just do what it takes to make it run as good as it looks, and leave it at that. An unmolested SA is not easy to come by these days, and that one is nearly all factory original, aside from the radio and wheels.
Treat it right, and it should make for a nice driver, with several years of life left in it.
Treat it right, and it should make for a nice driver, with several years of life left in it.
#18
Rotary Enthusiast
iTrader: (5)
Great find, good you did not pass it up, if i would had find it and had the money i would had bought it as well. Great condition. Try and strip the carb to it's bare minimum, they run better and they iddle at around 700rpm when well tuned, with all the emission stuff of, unless you need to pass a smog test in your state. but that's what i suggest. Congratulations again on the find.
#24
I agree!!! What a great find. You can buy any old first gen and have your way with it. This is a find. I know because I am trying to find one!!!
#25
Got Rotors?
Thread Starter
iTrader: (1)
Join Date: Jul 2005
Location: Statesville, NC
Posts: 856
Likes: 0
Received 0 Likes
on
0 Posts
I have a set of waffle wheels take were stock on my 79 but these must be after market. I have never seen any like these. they are American racing wheels, and they still have the center cap.
i got it cranked tonight, just could not keep it running long or sombody would have called the fire department. WOW the SMOKE, but cranks easy and idles nice. hope to get the smoke cleared tomorrow but im not sure.
i got it cranked tonight, just could not keep it running long or sombody would have called the fire department. WOW the SMOKE, but cranks easy and idles nice. hope to get the smoke cleared tomorrow but im not sure.