Hazard / Flasher Circuit Short
#1
Senior Member
Thread Starter
Hazard / Flasher Circuit Short
1985 Rx7 GSL.
I have a short on the 15A circuit that feeds the turn signals and hazards. When I turn the ignition key to the on position the 15A hazard / flasher fuse blows.
Prior to this condition when I indicated a turn or turned on the flashers the appropriate lights around the exterior would work, but the indicators in the instrument cluster did not illuminate flash indicating turn or hazard.
I've removed all the bulbs. I've removed the turn signal combination switch, the hazard / headlight cluster switch, and disconnected the instrument cluster.
The fuse still blows.
Not sure what my next step should be..
Thoughts?
I have a short on the 15A circuit that feeds the turn signals and hazards. When I turn the ignition key to the on position the 15A hazard / flasher fuse blows.
Prior to this condition when I indicated a turn or turned on the flashers the appropriate lights around the exterior would work, but the indicators in the instrument cluster did not illuminate flash indicating turn or hazard.
I've removed all the bulbs. I've removed the turn signal combination switch, the hazard / headlight cluster switch, and disconnected the instrument cluster.
The fuse still blows.
Not sure what my next step should be..
Thoughts?
Thread
Thread Starter
Forum
Replies
Last Post