GSL-SE Wheels on SA
#1
Junior Member
Thread Starter
GSL-SE Wheels on SA
I am sure its been discussed before, and the bolt pattern is different. Anyone up to speed on putting Stock GSL-SE wheels on a '79 SA? Are hubs that fit the SE wheels readily available?
Thanks, Bill
Thanks, Bill
#2
Out In the Barn
iTrader: (9)
You would need front rotors that are 4x114 for the front. These are not available but they can be redrilled. For the rear, it a little bit more complicated. You would need to convert the drum to disc and then have the axles redrilled to 114x4.
You could also swap the entire rear end with a GSL-SE one. For the front you could swap the GSL-SE spindles with all the brakes parts.
Much easier to just get some 15" wheels that are 4x110. The Konings looks good. I bought the Rewinds (15" 20mm offset 110x4)
https://konigwheels.com/wheels/main-line-wheels/rewind/
You could also swap the entire rear end with a GSL-SE one. For the front you could swap the GSL-SE spindles with all the brakes parts.
Much easier to just get some 15" wheels that are 4x110. The Konings looks good. I bought the Rewinds (15" 20mm offset 110x4)
https://konigwheels.com/wheels/main-line-wheels/rewind/
Last edited by KansasCityREPU; 01-09-19 at 03:55 PM.
#3
#4
Junior Member
Thread Starter
Watched your link, Restore your Waffles. I have a spare that has never been out ('79 GS w/ 80K, 2nd owner). Inspired me to restore them. Thanks, beautiful work.
Thread
Thread Starter
Forum
Replies
Last Post
jkent17
1st Generation Specific (1979-1985)
6
12-02-04 05:07 PM