Epsilon Gurus... Where can I get replacement hardware (bolts,washers,nut)?
#1
Senior Member
Thread Starter
Epsilon Gurus... Where can I get replacement hardware (bolts,washers,nut)?
I'm having my Epsilon wheels refinished and I'm trying to locate the hardware for it. If anyone has any suggestions as to where I can look for the hardware I'd appreciate it.
Each wheel has:
20 - M10, 1.0, E30 socket head cap screw
20 - Nuts
20 - Small washers (front under bolt)
20 - larger washers (back of wheel)
I went to Ababa Bolt and was able to find the washers but they did not have the screw (in stock) or nuts. I'd love to find some that are chrome looking if possible but I may be using either stainless or black oxide (I think that's what it's called??).
So where are you Epsilon guys getting your hardware?
Each wheel has:
20 - M10, 1.0, E30 socket head cap screw
20 - Nuts
20 - Small washers (front under bolt)
20 - larger washers (back of wheel)
I went to Ababa Bolt and was able to find the washers but they did not have the screw (in stock) or nuts. I'd love to find some that are chrome looking if possible but I may be using either stainless or black oxide (I think that's what it's called??).
So where are you Epsilon guys getting your hardware?
#3
Each wheel has:
20 - M10, 1.0, E30 socket head cap screw
20 - Nuts
20 - Small washers (front under bolt)
20 - larger washers (back of wheel)
I went to Ababa Bolt and was able to find the washers but they did not have the screw (in stock) or nuts. I'd love to find some that are chrome looking if possible but I may be using either stainless or black oxide (I think that's what it's called??).
So where are you Epsilon guys getting your hardware?
20 - M10, 1.0, E30 socket head cap screw
20 - Nuts
20 - Small washers (front under bolt)
20 - larger washers (back of wheel)
I went to Ababa Bolt and was able to find the washers but they did not have the screw (in stock) or nuts. I'd love to find some that are chrome looking if possible but I may be using either stainless or black oxide (I think that's what it's called??).
So where are you Epsilon guys getting your hardware?
Check with your local Fastenal store or McMaster Carr for online.
Fastenal has chrome finish M10x1.5 pitch in several lengths.
M10 Chrome socket heads at Fastenal
I dont see chromed M10 at McMaster and I don't see a 1.0 pitch in M10. Looks like 1.5 is the normal pitch and 1.25 is the fine pitch. From further research it looks like a 1.0 pitch is a standard but uncommon size. Hope that isn't required.
McMaster link
Hope that helps.
Last edited by dougingraham; 07-02-13 at 10:42 AM.
#4
Full Member
iTrader: (6)
Join Date: May 2003
Location: Saint Louis, MO
Posts: 222
Likes: 0
Received 0 Likes
on
0 Posts
I bought everything for redoing my epsilons last year through grattan fasteners, they sell the everything in bulk for way less then any other place. I went with chromed steal bolts as stainless has half the shear strength of steal..... be prepared though I still paid about 200 bucks for everything to do 4 wheels...
Bryan
Bryan
Thread
Thread Starter
Forum
Replies
Last Post
Kyo
2nd Generation Specific (1986-1992)
3
08-14-15 02:00 PM