Diy modifications (those of us on a budget)
#76
Full Member
Join Date: Aug 2013
Location: Trinidad & Tobago
Posts: 178
Likes: 0
Received 0 Likes
on
0 Posts
#80
Instrument Of G0D.
iTrader: (1)
^ nice! Ive got a backyard saw-tooth flywheel stop that i made sitting in the garage. Definitely less skill and effort was involved compared to your amazing flywheel socket. I take my hat off to that, thing's a work of art!
Today's bodge job was using a tiny screw, a tiny drill bit, a ground down spade terminal and a gob of solder to bodge a broken-off terminal on my AIT sensor untill a new one comes in.
Today's bodge job was using a tiny screw, a tiny drill bit, a ground down spade terminal and a gob of solder to bodge a broken-off terminal on my AIT sensor untill a new one comes in.
#81
Senior Member
Thread Starter
^ nice! Ive got a backyard saw-tooth flywheel stop that i made sitting in the garage. Definitely less skill and effort was involved compared to your amazing flywheel socket. I take my hat off to that, thing's a work of art!
Today's bodge job was using a tiny screw, a tiny drill bit, a ground down spade terminal and a gob of solder to bodge a broken-off terminal on my AIT sensor untill a new one comes in.
Today's bodge job was using a tiny screw, a tiny drill bit, a ground down spade terminal and a gob of solder to bodge a broken-off terminal on my AIT sensor untill a new one comes in.
#82
turbo or bust
iTrader: (8)
Join Date: May 2012
Location: bristol,pa
Posts: 870
Likes: 0
Received 0 Likes
on
0 Posts
Modified the turbo inlet duct fory fb turbo2 swap. Had to plug up a couple holes for emissions crap that is no longer there
Basically just inserted a large bolt into the larger hole, put on a hose clamp, cut off the head, put some panel bond on the inside of the hole until it was full, and put some on the outside, on the smaller hole i just panel bonded a push in body clip in. Total price, 0.00.
Basically just inserted a large bolt into the larger hole, put on a hose clamp, cut off the head, put some panel bond on the inside of the hole until it was full, and put some on the outside, on the smaller hole i just panel bonded a push in body clip in. Total price, 0.00.
#83
Instrument Of G0D.
iTrader: (1)
Flywheel stop. Cut with a grinder, bolts to the rear iron. Very easy. But yours is better. I wish i thought of that lol. I guess i just saw what scrap was immediately available to work with and that's what I came up with.
And my Idler pully to stop water pump slip and avoid over tensioning belts. Works great but you can see it had a negative effect on the bosch belts. I'm hoping this was due to the "Belt Grip" i was spraying all over them prior to installing the idler. New belts are in, we'll see how they go. If i get the same problem I'll do something else.
Last edited by WANKfactor; 03-19-16 at 02:22 PM.
#84
Instrument Of G0D.
iTrader: (1)
another one was the coolant level sensor on the radiator. The epoxy seemed to delaminate from the thread on mine and had to destroy it getting it out. To my disillusionment, a replacement was prohibitive in price and for some reason was a 4 month back order from japan so i made my own out of a steel plug, drilled to take a fairly heavy guage wire with shrink wrap and sealed with silicone.
The trick is to fill the cable up with soldier to prevent coolant wicking up and out, to ensure that the exposed tip is the right depth and that everything else is sealed and insulated.
Been in the car for a year with zero problems and it doesnt look silly or anything.
The trick is to fill the cable up with soldier to prevent coolant wicking up and out, to ensure that the exposed tip is the right depth and that everything else is sealed and insulated.
Been in the car for a year with zero problems and it doesnt look silly or anything.
Last edited by WANKfactor; 03-26-16 at 05:05 PM.
#85
Senior Member
Thread Starter
another one was the coolant level sensor on the radiator. The epoxy seemed to delaminate from the thread on mine and had to destroy it getting it out. To my disillusionment, a replacement was prohibitive in price and for some reason was a 4 month back order from japan so i made my own out of a steel plug, drilled to take a fairly heavy guage wire with shrink wrap and sealed with silicone.
The trick is to fill the cable up with soldier to prevent coolant wicking up and out, to ensure that the exposed tip is the right depth and that everything else is sealed and insulated.
Been in the car for a year with zero problems and it doesnt look silly or anything.
The trick is to fill the cable up with soldier to prevent coolant wicking up and out, to ensure that the exposed tip is the right depth and that everything else is sealed and insulated.
Been in the car for a year with zero problems and it doesnt look silly or anything.
Thread
Thread Starter
Forum
Replies
Last Post
NickNac113
1st Generation Specific (1979-1985)
13
10-01-15 09:25 PM