(ENGINE) Cleaning and painting a 12A
#32
orded up some gaskets for the water pump couple shims clutch aligment tool new polit bearing and seal manifold gasket
can i get away with just a silicone sealer on the oilpan?? or do i need a gasket.
need to get come more black paint and clear paint.
can i get away with just a silicone sealer on the oilpan?? or do i need a gasket.
need to get come more black paint and clear paint.
#38
got my gaskets and piloet bearing etc.
need to sand up and paint my oil pan water pump/housing and couple other things..
my clutch and pressure plate had rust on them only sand paper i had is 400 will the clutch be fine and not glaze or should i take like a 100 grit to it.
dose anyone thing i can get away with just gasket sealer on the oil pan?
heres my carb i have moded i need to disasemble it and sand all the rust off and give it a clear coat.
need to sand up and paint my oil pan water pump/housing and couple other things..
my clutch and pressure plate had rust on them only sand paper i had is 400 will the clutch be fine and not glaze or should i take like a 100 grit to it.
dose anyone thing i can get away with just gasket sealer on the oil pan?
heres my carb i have moded i need to disasemble it and sand all the rust off and give it a clear coat.