Rx7carl

Looks nice! Also engine paint is fuel and oil resistant. Very important to keeping a nice finish.

blwfly

iTrader: (4)

wow didnt know that.

vipernicus42

iTrader: (4)

Sweetness. Looks good like that Good work man!

Jon

defiant13

iTrader: (-1)

I'm in the process of doing the same. Looks really good man.

MattG

iTrader: (2)

So, your gonna come do mine right?

teddyrx2

iTrader: (33)

very clean motor

blwfly

iTrader: (4)

orded up some gaskets for the water pump couple shims clutch aligment tool new polit bearing and seal manifold gasket

can i get away with just a silicone sealer on the oilpan?? or do i need a gasket.

need to get come more black paint and clear paint.

blwfly

iTrader: (4)

sure come pay my rent.

teddyrx2

iTrader: (33)

im next

BlackWorksInc

Wow... that looks a lot smaller all cleaned up!
Guess after you get the one inch thick cake of grease off the engine does shrink a lil!

Nice work!

MattG

iTrader: (2)

If you can get mine looking like that, then you got your self a deal!

Heres what you got to start with

blwfly

iTrader: (4)

might want to put some muratic acid on this one.

blwfly

iTrader: (4)

got my gaskets and piloet bearing etc.
need to sand up and paint my oil pan water pump/housing and couple other things..

my clutch and pressure plate had rust on them only sand paper i had is 400 will the clutch be fine and not glaze or should i take like a 100 grit to it.

dose anyone thing i can get away with just gasket sealer on the oil pan?

heres my carb i have moded i need to disasemble it and sand all the rust off and give it a clear coat.