(DRIVETRAIN) Ford 8.8 rear end from grannys

 
Thread Tools
 
Search this Thread
 
Old Feb 11, 2006 | 04:39 PM
  #1  
boriqua51371's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: Dec 2005
Posts: 613
Likes: 0
From: New Hampshire
Ford 8.8 rear end from grannys

hi i was wondering if anyone is used the ford 8.8 kit from grannys and is it worth it , or is it better to make your own conversion
Old Feb 11, 2006 | 05:31 PM
  #2  
racintang's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Jun 2003
Posts: 367
Likes: 0
From: Virginia
I believe it is an 8" and I plan on purchasing one next year. Since it has all the stock mounting points for suspension and all I think it is a good deal plus you can then pick from a wide variety of rear diff. gears from summit racing and jegs and such. There are other 7 rear conversions but not as simple as the 8" rear in my opinion. The others you have to swap out internals and stuff and if you arn't familiar with doing it then your screwed. But take in to consideration that you will need to get the rear brakes all thought they are a dime a dozen plus you will have the more common five lug pattern.
Old Feb 11, 2006 | 05:44 PM
  #3  
pyro2's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Jun 2005
Posts: 58
Likes: 0
From: Oceanside
They also make a 9 inch now
Old Feb 11, 2006 | 08:42 PM
  #4  
vipernicus42's Avatar
Rotoholic Moderookie
Tenured Member: 20 Years
iTrader: (4)
 
Joined: May 2002
Posts: 5,972
Likes: 37
From: Ottawa, Soviet Canuckistan
grannys? Link?

Jon
Old Feb 11, 2006 | 08:52 PM
  #5  
Dan_s_young's Avatar
Turbo widebody FB
Tenured Member 10 Years
iTrader: (1)
 
Joined: May 2004
Posts: 3,733
Likes: 3
From: Alberta Canada
behold the darkside (unless you need a beefy rear end for all your ROTARY power): http://www.grannysspeedshop.com/
Old Feb 12, 2006 | 04:29 PM
  #6  
racintang's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Jun 2003
Posts: 367
Likes: 0
From: Virginia
Looks like I will be buying a 9" rear for the 7. The 9" has many more rear end ratios and is stronger than a 12 bolt GM rear.
Old Feb 12, 2006 | 05:14 PM
  #7  
Hades12's Avatar
Burning Oil-Grinding 3rd
Tenured Member 10 Years
 
Joined: Apr 2002
Posts: 4,094
Likes: 1
From: Union Mills NC
I should be picking up an 80 in the next week or two with a 9" in it. Cant wait to see how they did it. Even has the stock bolt pattern.
Old Feb 12, 2006 | 08:36 PM
  #8  
gonzz's Avatar
Banned. I got OWNED!!!
 
Joined: Mar 2002
Posts: 4,236
Likes: 0
From: Las Vegas, NV
Originally Posted by Hades12
I should be picking up an 80 in the next week or two with a 9" in it. Cant wait to see how they did it. Even has the stock bolt pattern.
Take some pics.. I want to install a 9" in my SA also
Old Feb 13, 2006 | 05:43 PM
  #9  
boriqua51371's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: Dec 2005
Posts: 613
Likes: 0
From: New Hampshire
i spoke to grant on granny shop according to him you can buy the hole set up with new lsd and choice of gear ration , new forged steel axles choice of bolt pattern, and all the mounting brackets for the rx for about 1600 also with the brake brackets to use your existing brakes or you can add different brakes.
Old Feb 13, 2006 | 06:10 PM
  #10  
gonzz's Avatar
Banned. I got OWNED!!!
 
Joined: Mar 2002
Posts: 4,236
Likes: 0
From: Las Vegas, NV
Nice..
Old Feb 14, 2006 | 07:25 PM
  #11  
racintang's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Jun 2003
Posts: 367
Likes: 0
From: Virginia
Pay the 895 for the housing with forged axlesa and then snag the diff. and brakes at a junk yard for under 100.00 You can get a new detroit style locker sarting at around 260.00 through summit racing and new gears of your choice starting at 119.00 and axles starting 110.00. Gear ratios run from 2.91:1 ratio to an outrageous 7.33:1 ratio.
Old Feb 17, 2006 | 05:22 PM
  #12  
pyro2's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Jun 2005
Posts: 58
Likes: 0
From: Oceanside
Originally Posted by vipernicus42
grannys? Link?

Jon
http://www.grannysspeedshop.com/

click on the "new products page"

enjoy
Old Mar 15, 2006 | 11:37 AM
  #13  
Hades12's Avatar
Burning Oil-Grinding 3rd
Tenured Member 10 Years
 
Joined: Apr 2002
Posts: 4,094
Likes: 1
From: Union Mills NC




Old Mar 15, 2006 | 12:13 PM
  #14  
Jose Feliciano's Avatar
chosen 1
Tenured Member 10 Years
 
Joined: Apr 2004
Posts: 1,726
Likes: 0
From: New Jersey
how much are we taking about for a 8 bolt in a GSLSE,it is not on there website
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Th0m4s
Build Threads
25
Feb 26, 2019 02:04 AM
coltboostin
Rotary Drag Racing
0
Aug 20, 2015 11:37 PM




All times are GMT -5. The time now is 05:40 AM.