Single Turbo RX-7's Questions about all aspects of single turbo setups.

some figures on hks t51r spl

Thread Tools
 
Search this Thread
 
Old Apr 17, 2006 | 12:55 PM
  #1  
rx7london's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Oct 2005
Posts: 32
Likes: 0
From: london uk
some figures on hks t51r spl

hi im thinking of buying a hks t51r spl for my fd just wondered what to expect of it at 1bar of boost on a ported engine and 1.4bar and also what rpm does it get on full boost at thanks
Reply
Old Apr 17, 2006 | 01:35 PM
  #2  
LUPE's Avatar
Banned. I got OWNED!!!
 
Joined: Apr 2005
Posts: 5,506
Likes: 0
From: Belleville, IL
You'll find all the information you need in this thread https://www.rx7club.com/showthread.p...&highlight=t51
Reply
Old Apr 23, 2006 | 05:25 PM
  #3  
dhahlen's Avatar
FD Under Construction =P
Tenured Member 15 Years
iTrader: (5)
 
Joined: Jun 2003
Posts: 4,022
Likes: 24
From: Avondale, AZ
Kan is tuning mine next weekend... we'll see what 23 psi on pump/methanol will do.

What did you make at 23psi previously eric? 527?
Reply
Old Apr 24, 2006 | 01:34 AM
  #4  
Rotortuner's Avatar
Undercover
Tenured Member 20 Years
 
Joined: Aug 2001
Posts: 1,983
Likes: 0
From: Ohio
Is the t51r an oil cooled center section only?

CJG
Reply
Old Apr 24, 2006 | 06:49 AM
  #5  
dhahlen's Avatar
FD Under Construction =P
Tenured Member 15 Years
iTrader: (5)
 
Joined: Jun 2003
Posts: 4,022
Likes: 24
From: Avondale, AZ
Originally Posted by Rotortuner
Is the t51r an oil cooled center section only?

CJG
Yes
Reply
Old Apr 24, 2006 | 09:02 AM
  #6  
LUPE's Avatar
Banned. I got OWNED!!!
 
Joined: Apr 2005
Posts: 5,506
Likes: 0
From: Belleville, IL
Originally Posted by dhahlen
Kan is tuning mine next weekend... we'll see what 23 psi on pump/methanol will do.

What did you make at 23psi previously eric? 527?
around 444whp
Reply
Old Apr 24, 2006 | 05:05 PM
  #7  
dhahlen's Avatar
FD Under Construction =P
Tenured Member 15 Years
iTrader: (5)
 
Joined: Jun 2003
Posts: 4,022
Likes: 24
From: Avondale, AZ
Originally Posted by LUPE
around 444whp
Ok you lying ****... what was the power with conversion? 15%? 510hp?

What type of dyno...

No way you made 444hp at 23psi on a kan tune with a KAI you turd.
Reply
Old Apr 25, 2006 | 10:17 AM
  #8  
pluto's Avatar
Rotary Freak
Tenured Member 20 Years
 
Joined: Feb 2001
Posts: 1,926
Likes: 0
From: fort worth, tx, usa
The dyno place we used at the time did made 444rwhp but the dyno guy said his dyno reads approx 20% lower than the rest of the dyno. However, due to the big debate on the forum, I think eric decided to use the 444rwhp figure instead. When we were using the dyno pack at the same boost level, I think we made 535rwhp at the same boost(23psi) and 603rwhp@27.5psi.

Steve



Originally Posted by dhahlen
Ok you lying ****... what was the power with conversion? 15%? 510hp?

What type of dyno...

No way you made 444hp at 23psi on a kan tune with a KAI you turd.
Reply
Old Apr 25, 2006 | 10:21 PM
  #9  
dhahlen's Avatar
FD Under Construction =P
Tenured Member 15 Years
iTrader: (5)
 
Joined: Jun 2003
Posts: 4,022
Likes: 24
From: Avondale, AZ
I just went for a ride on the KAI doing 3-5psi... MAN THAT TURBO HAS THE SWEETEST DAMN SOUND!!! HOLY CRAP. Can't wait for the tune this weekend...
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
NEWGENRX7
3rd Generation Specific (1993-2002)
6
Jun 26, 2019 12:20 AM




All times are GMT -5. The time now is 06:25 PM.