going non sequential advise please
#1
czseven
Thread Starter
Join Date: Nov 2006
Location: florida
Posts: 163
Likes: 0
Received 0 Likes
on
0 Posts
going non sequential advise please
ok I have my turbos off and want to go non seq. i have done plenty of reasearch but there is a couple of things.
there is a butterfly in the y pipe get rid of it or not
wire the flapper on the exhaust open or cut it out
i half to keep the bov but what abought the other valve, sorry can not think of name
do not have access to welder, and am not trying to spend money on this or nothing expensive. any added help would b great. and yes found the link with pic's was a little vague in spots. just wanna do it rite the first time.
there is a butterfly in the y pipe get rid of it or not
wire the flapper on the exhaust open or cut it out
i half to keep the bov but what abought the other valve, sorry can not think of name
do not have access to welder, and am not trying to spend money on this or nothing expensive. any added help would b great. and yes found the link with pic's was a little vague in spots. just wanna do it rite the first time.
#2
17 second FD
iTrader: (11)
Join Date: May 2006
Location: Poughkeepsie, New York
Posts: 2,436
Likes: 0
Received 1 Like
on
1 Post
I asked these questions before, too. Here's some of the answers I received, hope they help...
https://www.rx7club.com/3rd-generation-specific-1993-2002-16/what-boost-558174/
https://www.rx7club.com/3rd-generation-specific-1993-2002-16/what-benefits-does-aftermarket-b-o-v-give-you-537674/
I think those answer both of your questions...
https://www.rx7club.com/3rd-generation-specific-1993-2002-16/what-boost-558174/
https://www.rx7club.com/3rd-generation-specific-1993-2002-16/what-benefits-does-aftermarket-b-o-v-give-you-537674/
I think those answer both of your questions...
Thread
Thread Starter
Forum
Replies
Last Post
eplusz
General Rotary Tech Support
15
10-07-15 04:04 PM
Red-Dragon_Akuma
New Member RX-7 Technical
11
09-28-15 06:09 AM