Alright so im finally getting close to starting to install all my project stuff (2 years now) So i have an 89 t2, i sold my stock harness...dumb i know.

So Basically im running a 3rd gen UIM, TB and intake elbow, t78 with hks manifold, FD ignitor with MSD 6a, and MSD Blaster SS coils, and NPR Large FMIC.

Not sure what else is needed but one of my big worries is how to run the wiper motor without the stock harness? Also what about the IAT sensor (on the TB Elbow on the t2's and on the UIM on the fd manifold i have) do i still need it with the wolf?

Basically a list of sensors i need, which ones are stock, and which connectors i need form the stock harness would be good. So far all i can think of is Alternator plug, wiper motor plug, IAT plug... anything else?

As much help as you can give me is great.

kevin.

 

forgot to mention its the Wolf 3d V4... i just bought the TPS connector so thats off the list, any help with everything else?

kevin.

 

the only connectors i can think your giong to need are a CAS connector, a TPS connector, 3rd Gen ignitor connector, BAC or its equivlient, and i think thats it

the wolf comes with the connectors for the coolent, air, and injector clips

you dont need the stock IAT, the wolf comes with its own sensors


as for the wiper motor, just find someone with an s4 n/a harness there willing to cut up, or just get the harness clips and wire it up yourself, its only 6 wires iirc

 

ok cool i was starting to get worried, so now to find a CAS connector and wiper connector and im good to go.

kevin.