Wolf 3D Thanks Vagambler - Msd 8509 install
#1
I'm with stupid -----^
Thread Starter
Join Date: Mar 2001
Location: Calgary, AB, Canada
Posts: 994
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Vagambler - Msd 8509 install
Many thanks to VA for wiring information he provided for the MSD 8509 signal stableizer to modified CAS ... I have had one of these units kicking around for a couple years.. I jsut never got around to figuring out how to install it ..
I've always had a few signal errors, especially when cranking from cold.. at odd times even high rpm missfire on boost ....
After installing the msd, I now get 0 signal errors on startup and have yet to experience any high rpm missfires .. car starts up quicker as well since it gets a clean signal at lower cranking rpm .. I also now have my trigger voltage level set at medium...
Overall, this little box is certainly a gem.. relativly inexpensive item that will save you alot of headaches..
I've always had a few signal errors, especially when cranking from cold.. at odd times even high rpm missfire on boost ....
After installing the msd, I now get 0 signal errors on startup and have yet to experience any high rpm missfires .. car starts up quicker as well since it gets a clean signal at lower cranking rpm .. I also now have my trigger voltage level set at medium...
Overall, this little box is certainly a gem.. relativly inexpensive item that will save you alot of headaches..
#3
Rotary Freak
iTrader: (1)
Join Date: Mar 2004
Location: Grafton ,Va
Posts: 2,063
Likes: 0
Received 0 Likes
on
0 Posts
Here ya go guys , here is where I got mine , it runs $ 80.00 and well worth the cost , this would have cut my triggering problems out in no time , " once I got the Cas wired correctly " , hahaha Now if they just have a tunning class for the old farts like me .
http://store.summitracing.com/partde...5&autoview=sku
http://store.summitracing.com/partde...5&autoview=sku
Thread
Thread Starter
Forum
Replies
Last Post
24seven_dada
3rd Generation Specific (1993-2002)
20
11-10-18 12:03 PM
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
[For Sale] Scratch & Dent, Used, and Open-Box Sale!
SakeBomb Garage
Vendor Classifieds
5
08-09-18 05:54 PM