Wolf 3D Discuss the Wolf 3D Engine Management System

Wolf 3D Please help me tune my TII with wolf 3d version 3.1

Thread Tools
 
Search this Thread
 
Old 08-25-04, 12:07 PM
  #1  
Newbie
Thread Starter
 
JPrx_7's Avatar
 
Join Date: Aug 2004
Location: Franklin, NJ
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Please help me tune my TII with wolf 3d version 3.1

I recently purchased a 1990 TII with a TO4R single turbo and a wolf ems version 3.1 engine management. My car runs fine with the exception of the excessive gasoline smell in the cockpit. I think my car is running too rich and therefore, I bought and innovative LM-1 wideband. Low and behold, it is running way too rich. The wideband read 9.8 to 10.0 throughout wot running 12 lbs of boost. The a/f fluctuate around 13.0 - 15.0 in 1500 to 3200 rpm when cruising. The a/f also read 17.8 and 19.0 a few times when cruising and not under boost. Anyways, here's where I need your help because I noticed the previous owner did not leave me a wolf manual. He sold me the car because his visa ran out and he had to go back to Korea. I want to know exactly how I can raise the a/f to 11.0 under boost and fix the 17.0 and 19.0 a/f when not in wot. Please give the the exact details as to what menu on the screen I should toggle to. If possible, can someone email me at jprx_7@yahoo and leave a telephone number so we can discuss this. BTW, I do not have data logging. Thanks!!!!!!
Old 08-26-04, 12:13 AM
  #2  
I'm with stupid -----^

 
Chris Ng's Avatar
 
Join Date: Mar 2001
Location: Calgary, AB, Canada
Posts: 994
Likes: 0
Received 0 Likes on 0 Posts
download the manual for your wolf here: http://www.wolfems.com.au/products/e...ersion3/manual

be very careful playing around with the tune if you are unfamiliar with the basics of tuning a standalone...
Old 08-26-04, 05:15 PM
  #3  
Newbie
Thread Starter
 
JPrx_7's Avatar
 
Join Date: Aug 2004
Location: Franklin, NJ
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Thanks for the link. I downloaded the manual and printed it out. The manual says to in order to change a map point..

1) Goto Fuel Map
2) Select option 1 for Map point
3) Hit Set to save

Any, I know to be careful and not mess with anything except of fuel and make small increments on the chages. Anyhow, I selected Fuel Map while driving my car in fourth gear. I hit the option 1 for Map Point and when my a/f read 17.2 and I increase the fuel to that map point. I hit select to save. I kept on driving but the point that I changed still has a problem.

Where am I going wrong?
Old 08-29-04, 06:55 PM
  #4  
Brother of the Rotary

iTrader: (2)
 
eViLRotor's Avatar
 
Join Date: Jun 2001
Location: Arkham Asylum
Posts: 5,781
Likes: 0
Received 1 Like on 1 Post
When your AFR's are so lean, it will take a large adjustment to get it richer. Just keep adding fuel until you see a big change.

Also, when tuning fuel, make sure that your ACCELERATION ENRICHMENT and SUSTAIN are turned off....
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
befarrer
Old School and Other Rotary
2
10-05-15 03:30 AM
mulcryant
2nd Generation Specific (1986-1992)
10
09-09-15 05:24 PM
acha3
2nd Generation Specific (1986-1992)
7
09-06-15 08:14 AM
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM



Quick Reply: Wolf 3D Please help me tune my TII with wolf 3d version 3.1



All times are GMT -5. The time now is 02:48 AM.