Hi Guys... I am looking for a NA Series 4 or 5 stock engine map for my website I am building. I have a few other maps thanks to George & nyt I need to get a NA map. I have Plugin S4/S5, S6 turbo Standalone S4/5 , S6 and a few 20B and V4 plus maps plus others as well.

Cheers
Michael Smith

 

i can provide ya with a s4 n/a map michael. i will wait for final dyno-tune but, within 2 weeks,as its only been tuned by o2( load on road) and havent setup accel. enrichement etc ideally, still its a nice base tune map up 2 7000. i can upload the current map in the next few days if you like, otherwise the next tune should see good numbers(for a stock 6-port) in the next fortnight.

 

Thanks s1rx, I would perfer the undyno tuned map as they usually run dunoed maps a little leaner. Each engine is a little different this could cause problems running lean. The idea is to get people started and then let them tune the engine to completion. I found the biggest problem for new starters is getting the car up and running well enough that they can safely get it to dyno or drive it on the road without getting stuck or causing a traffic problem.
My 12A 6 port I had made 115rwhp with a Nikki that had been modified just a little. 1/4 mile tuned not a dyno in sight but it took about 30 passes and lots of changes.
Thanks again if you could post your map here it would be great.

Cheers
Michael Smith

 

roger...yeh no worries about running lean on my current map, plenty of fuel there. ill get it up by end of week. usual story aint it, w/e is just another freakin weekday!.. always someones car 2 fix, and its never ya own..

 

Tell me about it!!!