Wolf 3D My problem with wolf injector staging
10-06-04, 12:01 PM
#1
My problem with wolf injector staging
Since ive been playing with different types of staging setups, I've noticed the interpolation of the wolf with staging has become an issue.
First, if you try to bring the secondaries on all at once, there will be lean / rich spots in between the load bands you do that, as it interpolates. I currently redid my setup to slowly bring on the secondaries by 15% every load band above 43.
This seems to be working better, but it makes tuning a little bit more difficult.
I was hoping wolf was more like haltech where you could set a staging point and it'd be a definitive point without interpolation.
First, if you try to bring the secondaries on all at once, there will be lean / rich spots in between the load bands you do that, as it interpolates. I currently redid my setup to slowly bring on the secondaries by 15% every load band above 43.
This seems to be working better, but it makes tuning a little bit more difficult.
I was hoping wolf was more like haltech where you could set a staging point and it'd be a definitive point without interpolation.
10-07-04, 07:34 PM
#2
Send me your BMX parts
Ya the staging is a bit harder to figure out if your new to the Wolf's. What are your auxillary/2nds % set at? also, whats your global fuel scale set at?
Thread
Thread Starter
Forum
Replies
Last Post