Wolf 3D Help with ignition wiring (fd ignitor, 4 seperate coils), and a 12V question
#1
Rotary Enthusiast
Thread Starter
iTrader: (4)
Join Date: Dec 2002
Location: wayne, nj
Posts: 830
Likes: 0
Received 0 Likes
on
0 Posts
Help with ignition wiring (fd ignitor, 4 seperate coils), and a 12V question
Hey guys,
alright here's my ignition setup:
89 Mazda Turbo2
Wolf 3D V4
FD Ignitor
(1) MSD 6A
(4) MSD Blaster SS Coils
I have nyt's directions on how to wire the FD ignitor and so that part is solved.
But I have a question about the Ignition Ground (Blue/Shield, PIN31) that comes out of the Wolf unit.
basically, where do i ground that too? there's no ground in the FD Ignitor harness, so do I just ground it to the body? or do i ground it directly to the ignitor or what?
Also I'm trying to plan a fusebox setup for the 12v sources i need. However I want to be sure about which ones should get a constant +12V and which should be switched (i figured since most cricuits are ground activated that they'd be constant 12V)
here's my list:
Turbo Timer - +12V Constant
Aux Output 1 (Meth Injection) - +12V Constant to a Relay
Coils - +12V Constant to a Relay (?)
Ignitor - +12V Switched on by ignition
Injectors - +12V Constant (?)
Fuel Pump - +12V Constant to Relay (?)
FAN - +12V Constant To Relay (?)
Boost Controller - +12V Constant (?)
the turbo timer and boost controller are the Wolf ones.
I just want to be able to get everything squared away before i start wiring, please help.
kevin.
alright here's my ignition setup:
89 Mazda Turbo2
Wolf 3D V4
FD Ignitor
(1) MSD 6A
(4) MSD Blaster SS Coils
I have nyt's directions on how to wire the FD ignitor and so that part is solved.
But I have a question about the Ignition Ground (Blue/Shield, PIN31) that comes out of the Wolf unit.
basically, where do i ground that too? there's no ground in the FD Ignitor harness, so do I just ground it to the body? or do i ground it directly to the ignitor or what?
Also I'm trying to plan a fusebox setup for the 12v sources i need. However I want to be sure about which ones should get a constant +12V and which should be switched (i figured since most cricuits are ground activated that they'd be constant 12V)
here's my list:
Turbo Timer - +12V Constant
Aux Output 1 (Meth Injection) - +12V Constant to a Relay
Coils - +12V Constant to a Relay (?)
Ignitor - +12V Switched on by ignition
Injectors - +12V Constant (?)
Fuel Pump - +12V Constant to Relay (?)
FAN - +12V Constant To Relay (?)
Boost Controller - +12V Constant (?)
the turbo timer and boost controller are the Wolf ones.
I just want to be able to get everything squared away before i start wiring, please help.
kevin.
Thread
Thread Starter
Forum
Replies
Last Post
LunchboxSA22
2nd Generation Specific (1986-1992)
37
10-26-15 10:53 AM
The Shaolin
2nd Generation Specific (1986-1992)
9
09-14-15 07:50 PM
befarrer
Microtech
3
08-22-15 05:52 PM