Does anyone know of a mechanic that would install such a system and does anyone have one on their car. I saw an AEM progressive system and wondered if anyone had any personal experience.

 

Im was going to have this done, but didnt know anyone locally that knew how to do it either. Doesnt seem hard, but Id rather someone that has done it on an FC before.

 

Exactly. There are a few places that say they CAN do it but have never done it to a FD. I also wonder if you can pass smog with it done

 

Yes youl be able to pass smog with it.

And believe me.. with the systems they have today.. its extremely easy to install it.

take a look at coolingmist's systems... you wont be disapointed... www.coolingmist.com

 

yes, it is very easy to install. I have done a few installs where the customer didnt want the extra reservior so we used the factory washer reservior. You can do straight water injection so the reservior will work for your windshield and water injection. If you want to do alchol injection then I wouldnt recommend you spray your windshield anymore. Id recommend a tune after you get it installed as well.

 

I generally suggest a 50/50 water/meth injection

 

Any ideas as to where i could put the reservoir. I have a battery in the passenger side bin, and the driver's side i use for storage (extra oil, coolant, protek r, etc.) I guess i could take out the washer fluid reservoir, but i really don't want to.

 

Coolingmist sells a trunkmount kit... everything is preassembled... so all you have to do is hook up a power source and run the line/lines to the enginebay.

 

you could always run a fuel cell of sorts in the trunk, with the proper vent and discharge plumbing you should have no problems and a bigger capacity of course is a plus

 

Do you guys have this system? And if so, where is yours located and do you have pics?

 

Different trunkmounts (for various applications):
http://coolingmist.com/pagedisplay.a...ey=trunk_mount

Installation diagrams:
http://coolingmist.com/instructions.aspx

Installation INSTRCUTIONS for specfic kits:
http://www.coolingmist.com/info.aspx?key=installdocs

 

i have a trunk mount but i dont have an rx7 so i dont think pics would help much, i have a build thread in the auxilary injection forum