West RX-7 Forum Serving California, Nevada, Arizona, Hawaii

turn signals

Thread Tools
 
Search this Thread
 
Old May 24, 2010 | 03:20 PM
  #1  
shacal13's Avatar
Thread Starter
Full Member
iTrader: (2)
 
Joined: Feb 2010
Posts: 99
Likes: 0
From: socal
turn signals

need some help guys.

i have an 88 t2 and i am not getting turn signals. all the wiring looks good i have 2 bran new bulbs in. the flasher box on the driverside is clicking on and off like it should. i dont know if ther should be a plug plugged in because i cant seem to find it but at the top of the flasher box there is an spot for a plug but nothings plugged in and i cant find a dangling plug under the dash.

we have a 91 and on that one it has all the plugs plugged into every spot. anyone shed some light for me. cant drive the car with no turn signals.

Shaun
Reply
Old May 24, 2010 | 05:13 PM
  #2  
RicerJ's Avatar
Rotary its a way of life
Tenured Member 10 Years
 
Joined: Feb 2009
Posts: 724
Likes: 1
From: Fredericksburg, VA
if you have cruise control there wont be a plug left everything should be plugged in remove the kick panel and check everything out its held in place by a 10 mm
Reply
Old May 25, 2010 | 10:52 AM
  #3  
shacal13's Avatar
Thread Starter
Full Member
iTrader: (2)
 
Joined: Feb 2010
Posts: 99
Likes: 0
From: socal
i do have cruise control and everything is plugged in. i was curious if there is supposed to be a plug in the top plug area by the 10 mm bolt.
Reply
Old May 27, 2010 | 10:19 AM
  #4  
shacal13's Avatar
Thread Starter
Full Member
iTrader: (2)
 
Joined: Feb 2010
Posts: 99
Likes: 0
From: socal
i figured it out , loose wire all is well now.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
The1Sun
1st Generation Specific (1979-1985)
7
Sep 18, 2015 07:13 PM
Farkel
3rd Generation Specific (1993-2002)
4
Sep 16, 2015 06:16 PM
The1Sun
New Member RX-7 Technical
5
Sep 15, 2015 04:45 PM
m_haiser
2nd Generation Specific (1986-1992)
1
Sep 13, 2015 04:21 PM




All times are GMT -5. The time now is 02:58 PM.