SoCal 's monthly San Bernardino rotary meet: Second Saturday of each month.
#1501
Banned. I got OWNED!!!
Join Date: May 2006
Location: San Francisco, California
Posts: 372
Likes: 0
Received 0 Likes
on
0 Posts
good meet. LOTS of fun.
i dont think i've ever said "****, im going to die" more than i did today.
i dont think i've ever said "****, im going to die" more than i did today.
Last edited by LittleCon; 09-09-06 at 05:18 PM.
#1502
Full Member
Join Date: Aug 2004
Location: San Bernardino County, Camp Pendleton, Kissimmee Fl.
Posts: 178
Likes: 0
Received 0 Likes
on
0 Posts
well I had to work as usuall, ok Man I got to say this again cause I really need this part, My daily on the rx7 are down till the parts come in the mail but I need a slave cylinder for a turbo FC used is fine cause I already ordered a new one but it wont be here for another week and I need a car to drive, well let me know anyone I will even take it off of a vehicle or whatever
#1504
No more 7 or 8
iTrader: (3)
Join Date: Jun 2004
Location: San Bernardino - So Cal
Posts: 841
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by fc3stech
well I had to work as usuall, ok Man I got to say this again cause I really need this part, My daily on the rx7 are down till the parts come in the mail but I need a slave cylinder for a turbo FC used is fine cause I already ordered a new one but it wont be here for another week and I need a car to drive, well let me know anyone I will even take it off of a vehicle or whatever
I have a new slave cyl rebuld kit I will sell you for $10. let me know if this helps.
Rice- sweet! did you get to drive it? that bridge sounds soo soo good huh?
#1506
IIMMM BBAAACCKKK!!
iTrader: (8)
sweet riceburner! your a few step ahead of me i just got my motor installed today... we crunched on it from 11am to 8pm, and got the motor in right around 7:30... alot of sthings needed to be wrapped up before the engine could be installed....
heres a few pics for all your viewing pleasures ill post some tomarrow of it installed
heres a few pics for all your viewing pleasures ill post some tomarrow of it installed
#1509
IIMMM BBAAACCKKK!!
iTrader: (8)
Originally Posted by GUITARJUNKIE28
suhhweet!
remind me to give you the 2 cans of touch-up paint, or i can just paint the manifolds when you bring it in.
remind me to give you the 2 cans of touch-up paint, or i can just paint the manifolds when you bring it in.
well, i was just kidding... i did paint them though... i got duplicolors "cast-aluminum" color.... you can see what color it is by the tranny... looks just like a very clean aluminum.... thats what i painted the intakes, throttle body, elbow, and thermostat housing with..... basically the same color they were, just w/ a slight shine to them.... but the touch up paint would be cool, i did happen to put a few little niks in the paint
oh, and i forgot to give you my main pulley... i thought it was a bolt on one ,but it replaces the whole shebang! i tried to take the big bolt off, but you got it on there pretty tight, so ill just send it w/ the rest of the stuff so you can throw it on
#1510
multipersonality disorder
Join Date: Feb 2002
Location: so. cal
Posts: 5,656
Likes: 0
Received 0 Likes
on
0 Posts
yea, i'll zip it off with the impact and swap it out. no biggie.
if you could, make sure the clutch hydraulics are working when you drop it off. when you do the nut, you have to have the clutch pressed in, or it's possible for the spacer to drop. if that happens, it'll eat the needle bearings, thrust plates, front bearing, and maybe more.
if you could, make sure the clutch hydraulics are working when you drop it off. when you do the nut, you have to have the clutch pressed in, or it's possible for the spacer to drop. if that happens, it'll eat the needle bearings, thrust plates, front bearing, and maybe more.
#1520
IIMMM BBAAACCKKK!!
iTrader: (8)
nope.. there was about 1/2" maybe 3/4"... so no need to modify...
hey dave, im having big trouble w/ my yhdraulics for the clutch.... ill have to give you a call tomarrow and see what you think it might be... new master, ss line, and new slave cyl... and no matter how many times i press the clutch pedal, no pressure gets built.... even opened bleeder valve, and then even took off the hard line off of the master... then pumped it, and nothing..... just a few milimeter sized air bubbles... im using dot 4 synthetic fluid... could that be the problem?
hey dave, im having big trouble w/ my yhdraulics for the clutch.... ill have to give you a call tomarrow and see what you think it might be... new master, ss line, and new slave cyl... and no matter how many times i press the clutch pedal, no pressure gets built.... even opened bleeder valve, and then even took off the hard line off of the master... then pumped it, and nothing..... just a few milimeter sized air bubbles... im using dot 4 synthetic fluid... could that be the problem?
#1522
SOME SAY....
Join Date: Oct 2005
Location: ON THE OTHER SIDE OF THE 15FWY, NEAR THE 215
Posts: 2,099
Likes: 0
Received 0 Likes
on
0 Posts
****, i wish i could have stayed, my homies exwife was being a bitch cuntrag with a stick up her ***, so we had to leave. hopefully next time ill be able to do the whole run again, by the way i was the one with the first gen with the bad *** aerodynamic driverside fender. it has that "crinkle effect" for max aerodynamics
#1523
multipersonality disorder
Join Date: Feb 2002
Location: so. cal
Posts: 5,656
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by vipers
nope.. there was about 1/2" maybe 3/4"... so no need to modify...
hey dave, im having big trouble w/ my yhdraulics for the clutch.... ill have to give you a call tomarrow and see what you think it might be... new master, ss line, and new slave cyl... and no matter how many times i press the clutch pedal, no pressure gets built.... even opened bleeder valve, and then even took off the hard line off of the master... then pumped it, and nothing..... just a few milimeter sized air bubbles... im using dot 4 synthetic fluid... could that be the problem?
hey dave, im having big trouble w/ my yhdraulics for the clutch.... ill have to give you a call tomarrow and see what you think it might be... new master, ss line, and new slave cyl... and no matter how many times i press the clutch pedal, no pressure gets built.... even opened bleeder valve, and then even took off the hard line off of the master... then pumped it, and nothing..... just a few milimeter sized air bubbles... im using dot 4 synthetic fluid... could that be the problem?
you don't need expensive fluid for the clutch, but i don't think that's the problem.
#1524
No more 7 or 8
iTrader: (3)
Join Date: Jun 2004
Location: San Bernardino - So Cal
Posts: 841
Likes: 0
Received 0 Likes
on
0 Posts
looking freakin awsome Jesse! man I so wanted to be there to help put all the fun stuff in. That is the best part of everything you are doing. how about you pull it all out and we will put it all back in after I move??? no???? I didnt htink you were going to go for that.
anyways, it is lookin pretty good. I cant wait to see it all done and running!
anyways, it is lookin pretty good. I cant wait to see it all done and running!
#1525
Banned. I got OWNED!!!
Join Date: May 2006
Location: San Francisco, California
Posts: 372
Likes: 0
Received 0 Likes
on
0 Posts
Wheres all the rest of the pictures? I know i wasn't the only one taking them.
and nice motor Jesse
oh, one more thing: whens the next 'group build' thing? This presilencer is giving me a headace (well not the silencer, but my garage / dad / schedual).
and nice motor Jesse
oh, one more thing: whens the next 'group build' thing? This presilencer is giving me a headace (well not the silencer, but my garage / dad / schedual).