My RX-3 is now running on 85 struts/brakes along with GC ground control coil overs/springs and RE speed camber kit. However, it is running to low for my taste. My aging organs cant handle a rough ride. I need someone to copy the stock 1/4" thick triangular spacer. I need 2 sets: 1/2" and 1"

thanks and no postwhoring please.

 

Have you checked with RX Mist or whatever the name of that shop is? I figure that might be worth a shot. They do fabricate exhaust mani's and such. No reason they couldn't make what you need too. If not then shoot me the exact specs of what you need and I can check with my local sources.

Zach

 

oh yeah, I should call Rene. thanks meng.

 

Hey, that's what I'm here for.

 

delete thread please.

 

Alt+F4

 

Wackyracer, if you need any custom stuff made here is the name/telephone number to a fabricator I use for a lot of my custom stuff.
DRE (Dyda Race Engineering)
located in Gardena over by the Nissan building off the 110/405.
(310)768-3163 and ask for Bruce.

He is not cheap but, does really good custom work.

Good Luck

 

thanks Albert

 

Dumbest thread evah!!! No postwhoring me ****! Get some new organs ey...

 

lol.

 

I used the stock 1/4 spacer but I think its still too low. Im not sure if lowering the rear will raise the front. OR I may just use TMC springs in the front and junk the GC coil overs.

 

If you just need a spacer, then just use a hacksaw and cut it out of aluminum. It will take a while with the 1" thick spacer but you'll save huge money. Just take whatever you are replacing and trace around it on the Al plate...then cut/grind/dremmel/file

 

thanks for the idea but its its already in the works.

 

hey albert how long is your site going to be under construction

 

Hey Wacky, are you finished with this thread? Let me know meng.

 

yes sir. mr. anti-postwhore.

 

Hey Wacky if you can't lower it Well I guess you know what you need to do now!!!!
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
JUNK IT!!!!!!!!

 

not low enough...may be another .50 to 1.00" will do it. If you dont like the coil over let me know I'll be glad to take that off your hands