I had my FD wired up with a Microtech LTX-8 EMS from Rene at RMS now all my gauges dont work at all but fuel. Anybody here in Socal know how to fix it or help me out, I will pay them. Anybody have an FD with similar problems that had theirs fixed please let me know. need this done ASAP or else I will just go with Apexi Power FC.
Located in Long Beach.

 

Well...speaking from experience using a Microtech on my FC, the temp gauge will not work anymore and the tach needs to be wired in to the EMS.

As far as your speedo is concerned, I don't see any reason why it shouldn't work.

 

Yeah its weird but everything works fine cause we checked it on the dyno.
This is the only holding me from driving my beast.

 

Install an aftermarket temp gauge.

 

I know but what about the rest of the gauges? I am a pendejo when it comes to wiring so I dont want to even try it. What shop do you guys recommend to fix this prob of mine.

 

RMS wired up my microtech also in my 1st gen T2 motor, and the wires cought on fire, call Juni at JRX they fixed my problem 626) 338-0150

 

I know with the LS1 swaps we have to ground a few wires at X-14 in order to get the cluster working again...