Anyone know who can do FMIC piping: S.Cali
#1
I don't have 3rd gear
Thread Starter
Join Date: Jan 2003
Location: California
Posts: 747
Likes: 0
Received 0 Likes
on
0 Posts
Anyone know who can do FMIC piping: S.Cali
Hey guys, I have the intercooler already and I have been looking for someone who could do the piping for me. Please let me know if you know anyone or know of a shop that does good work. Thanks!
Xzyras@aol.com
Xzyras@aol.com
#3
Speed Mach Go Go Go
iTrader: (2)
Join Date: Oct 2001
Location: My 350Z Roadster kicks my RX7's butt
Posts: 4,772
Likes: 0
Received 2 Likes
on
2 Posts
Kyle from Mazdatrix but not sure if he does any work on the side but the guy that used to answer the phone has a side business (forgot his name) but definately "NOT" the shop behind Mazdatrix.
no one will have a 2 & 3/4 mandrel bender. get good pipes from ebay (there's two good companys. the rest are thin cheap ****) and then have then cut and welded to fit.
no one will have a 2 & 3/4 mandrel bender. get good pipes from ebay (there's two good companys. the rest are thin cheap ****) and then have then cut and welded to fit.
#5
One Luv "Till The End"
iTrader: (33)
rite here player here is a link of the last front mount we did!!! Oh by the way never buy inter cooler pipes of ebay there junk, there walls are to thin to tig weld, and they collaspe with pressure when the t-bolts or any clamp is put on them.
PM me thanks teddy my brothers name is piston killa were from san diego all fabbing is done in house out of our garage. 12:31 motor sports
https://www.rx7club.com/2nd-generation-specific-1986-1992-17/12-31-motor-sports-custome-fabrications-645361/
Bro's screen name is as follow
https://www.rx7club.com/members/piston-killa--75728/
PM me thanks teddy my brothers name is piston killa were from san diego all fabbing is done in house out of our garage. 12:31 motor sports
https://www.rx7club.com/2nd-generation-specific-1986-1992-17/12-31-motor-sports-custome-fabrications-645361/
Bro's screen name is as follow
https://www.rx7club.com/members/piston-killa--75728/
Trending Topics
#11
Speed Mach Go Go Go
iTrader: (2)
Join Date: Oct 2001
Location: My 350Z Roadster kicks my RX7's butt
Posts: 4,772
Likes: 0
Received 2 Likes
on
2 Posts
Contact Mazdatrix and see if they can contact Henry for you. He does fab work on the weekends and has his own shop.
Coast fabrication in Costa Mesa or Huntington. They did the 797B and other rotary cars. They are expensive and the wait is months long but one of the guys that worked their also opened his own shop but I lost his name and number. You can ask them.
Coast fabrication in Costa Mesa or Huntington. They did the 797B and other rotary cars. They are expensive and the wait is months long but one of the guys that worked their also opened his own shop but I lost his name and number. You can ask them.
#12
Rx-hippie
iTrader: (1)
Join Date: Sep 2003
Location: Torrance CA
Posts: 2,076
Likes: 0
Received 0 Likes
on
0 Posts
http://maps.google.com/maps?f=q&hl=e...EiQOny6gc&cd=2
Renee's Muffler Shop
_
2323 Pasadena Ave
Los Angeles, CA 90031
(323) 222-4697 -
(323) 221-6939 -
Does great with with, IC setups. Has one fast drag rx-3 aswell.. and knows his ****!
Renee's Muffler Shop
_
2323 Pasadena Ave
Los Angeles, CA 90031
(323) 222-4697 -
(323) 221-6939 -
Does great with with, IC setups. Has one fast drag rx-3 aswell.. and knows his ****!
#14
I don't have 3rd gear
Thread Starter
Join Date: Jan 2003
Location: California
Posts: 747
Likes: 0
Received 0 Likes
on
0 Posts
Henry is one busy guy. I think he has a few cars he's working on right now.
Called Renee at his shop. He told me he can't do it and he doesn't know when he can do it. He said probably a long time. That's what he told me.
Teddy, your brother asked me a few questions like did I have p/s. I have not heard back from him yet. But you guys are to far. With gas prices this high, paying you to do it and buying pipes and the the price of the IC, I'm thinking the Greddy kits aren't so expensive. And they come with the elbow and flange.
Called Renee at his shop. He told me he can't do it and he doesn't know when he can do it. He said probably a long time. That's what he told me.
Teddy, your brother asked me a few questions like did I have p/s. I have not heard back from him yet. But you guys are to far. With gas prices this high, paying you to do it and buying pipes and the the price of the IC, I'm thinking the Greddy kits aren't so expensive. And they come with the elbow and flange.
#16
Rotary Enthusiast
Rene exhausted
I am so sorry for turning poeple out,I wish i had a bigger shop and an extra set of hands.I have tons of things to do in a short time now days ,i have to open 7 days to
keep my people happy.I am the only one doing the work at this moment.I do all the port work,welding,machining,mufflers,towing poeples cars,etc....
My work is clean and fast turnaround,At this moment ii cannot take any more
work,Its hard to say when,sometimes i can take them when there is an open spot
sometimes i can't.Its unpredictable.
I am working on getting a bigger shop,and extra help.I Cannot say when ,
but it is on my list for this year.
Had to shut down my website but here is a temporary LINK below:
http://www.myspace.com/renerx3
Thanks for the recomendation
trainwreck517
silentblu
keep my people happy.I am the only one doing the work at this moment.I do all the port work,welding,machining,mufflers,towing poeples cars,etc....
My work is clean and fast turnaround,At this moment ii cannot take any more
work,Its hard to say when,sometimes i can take them when there is an open spot
sometimes i can't.Its unpredictable.
I am working on getting a bigger shop,and extra help.I Cannot say when ,
but it is on my list for this year.
Had to shut down my website but here is a temporary LINK below:
http://www.myspace.com/renerx3
Thanks for the recomendation
trainwreck517
silentblu
Last edited by 61620B; 05-12-07 at 01:48 AM.
#18
I don't have 3rd gear
Thread Starter
Join Date: Jan 2003
Location: California
Posts: 747
Likes: 0
Received 0 Likes
on
0 Posts
Actually Rene, Fris gave me your number. Seems everyone is super busy.
Teddy, what do you mean? I don't have a trailer or a truck to pull the trailer. Damnit I wish you guys where just a bit closer. You guys are close to 200 miles away. Plus your work looks super clean.
Thanks for the help guys!
Teddy, what do you mean? I don't have a trailer or a truck to pull the trailer. Damnit I wish you guys where just a bit closer. You guys are close to 200 miles away. Plus your work looks super clean.
Thanks for the help guys!
#21
I can haz rotary?
iTrader: (1)
http://maps.google.com/maps?f=q&hl=e...EiQOny6gc&cd=2
Renee's Muffler Shop
_
2323 Pasadena Ave
Los Angeles, CA 90031
(323) 222-4697 -
(323) 221-6939 -
Does great with with, IC setups. Has one fast drag rx-3 aswell.. and knows his ****!
Renee's Muffler Shop
_
2323 Pasadena Ave
Los Angeles, CA 90031
(323) 222-4697 -
(323) 221-6939 -
Does great with with, IC setups. Has one fast drag rx-3 aswell.. and knows his ****!
I am so sorry for turning poeple out,I wish i had a bigger shop and an extra set of hands.I have tons of things to do in a short time now days ,i have to open 7 days to
keep my people happy.I am the only one doing the work at this moment.I do all the port work,welding,machining,mufflers,towing poeples cars,etc....
My work is clean and fast turnaround,At this moment ii cannot take any more
work,Its hard to say when,sometimes i can take them when there is an open spot
sometimes i can't.Its unpredictable.
I am working on getting a bigger shop,and extra help.I Cannot say when ,
but it is on my list for this year.
Had to shut down my website but here is a temporary LINK below:
http://www.myspace.com/renerx3
Thanks for the recomendation
trainwreck517
silentblu
keep my people happy.I am the only one doing the work at this moment.I do all the port work,welding,machining,mufflers,towing poeples cars,etc....
My work is clean and fast turnaround,At this moment ii cannot take any more
work,Its hard to say when,sometimes i can take them when there is an open spot
sometimes i can't.Its unpredictable.
I am working on getting a bigger shop,and extra help.I Cannot say when ,
but it is on my list for this year.
Had to shut down my website but here is a temporary LINK below:
http://www.myspace.com/renerx3
Thanks for the recomendation
trainwreck517
silentblu
Too bad Rene is booked up. He just finished doing some work on my car, and all I can say is, wow! He does some clean *** work at a very fair price.
Hopefully he gets a bigger shop soon.
#23
Speed Mach Go Go Go
iTrader: (2)
Join Date: Oct 2001
Location: My 350Z Roadster kicks my RX7's butt
Posts: 4,772
Likes: 0
Received 2 Likes
on
2 Posts
I need to get my battery box welded in the rear bin. I've allready missed several races. I have a fabricator in hollywood but can't get squeezed in. I may have to go to san diego. I also need my damn A/C back. Even if I had a convertible, i'd still have A/C.
#25
Speed Mach Go Go Go
iTrader: (2)
Join Date: Oct 2001
Location: My 350Z Roadster kicks my RX7's butt
Posts: 4,772
Likes: 0
Received 2 Likes
on
2 Posts
Modified Mag - April:
Perfomance Tube Bending (and Fabrication)
Covina, CA
626-858-8371
www.uniquefabrication.com
949-305-9305
Perfomance Tube Bending (and Fabrication)
Covina, CA
626-858-8371
www.uniquefabrication.com
949-305-9305