NEW Rotary Parts.....
#352
4 Formula D race events plus doing the All Star bash this past weekend at 100 degree weather@Willow springs and still running strong with no Problem with the Rotary-Works
76mm Turbo,intercooler,Radiator ,Pipes&hoses oil coolers and 90mm Throttle body........Proven at the tracks making consistent Horsepower........
Here is a couple Videos
RIDE ALONG ON Board...
http://www.youtube.com/profile?user=.../0/fZ3XeyL1k2c
http://www.youtube.com/profile?user=.../1/Fm5SmSAu5rw
http://www.youtube.com/profile?user=.../2/0S0O0fHO7Rk
76mm Turbo,intercooler,Radiator ,Pipes&hoses oil coolers and 90mm Throttle body........Proven at the tracks making consistent Horsepower........
Here is a couple Videos
RIDE ALONG ON Board...
http://www.youtube.com/profile?user=.../0/fZ3XeyL1k2c
http://www.youtube.com/profile?user=.../1/Fm5SmSAu5rw
http://www.youtube.com/profile?user=.../2/0S0O0fHO7Rk
#354
Garage Hero
iTrader: (93)
I can vouch for the RW 20Bfd.... I was out there all weekend...and it was 103 out. The rotary works car continued to run out on the track session after session while all the other cars had to do "hot" laps to cool their cars down or even come into the pitts. That car's Bonzai... man..No joke. I was actually in Micky Frial's S14 right behind you guys when you had that Bad Left rear Blow out...
#355
yes that tired exploded like a bomb shredding our fender and side skirt.......that track was super hot and tires just couldnt handle the 150 mph tire spin doing 4th gear in the back side of the track.....LOL
we have some on board footage see if we can put it here soon..
we have some on board footage see if we can put it here soon..
#357
I know you are busy. . .but any progress on the FD V-mount kit? Sounds like your current setup is staying very cool even in high temps. . .We want it! lol. Seriously, will be a great selling item once available.
--Jeff
--Jeff
#360
Hello everyone.....sorry but been a while,designing parts, test ,work work and Race Race test more parts in real world .....busy at shop, thats what we been doing.
Here are the latest of the new Rotary-works parts..
New RW 3" polish cast elbow for FD(fits cosmo 2 hole and 4 hole FD pattern)
New RW 3" polish cast elbow for FC to be used for stock and modified turbo set ups
New RW V mount kit 3 Row Radiator/Intercooler 3" inlets 3.5 " thick,pipes,hoses and clamps
New RW 3 " polish full Mandrel Racing Exhaust for FD Rx7 (we sell individuals,down pipe,Mid pipe and rear muffler)
Here are the latest of the new Rotary-works parts..
New RW 3" polish cast elbow for FD(fits cosmo 2 hole and 4 hole FD pattern)
New RW 3" polish cast elbow for FC to be used for stock and modified turbo set ups
New RW V mount kit 3 Row Radiator/Intercooler 3" inlets 3.5 " thick,pipes,hoses and clamps
New RW 3 " polish full Mandrel Racing Exhaust for FD Rx7 (we sell individuals,down pipe,Mid pipe and rear muffler)
#362
check out the latest picture Rotary-Works@Irwindale drift night ,Spo Com plus the build up video of the FD Rx7 we have.....
http://www.youtube.com/user/ReneMoto.../0/14eGQi5pNSU
http://www.youtube.com/user/ReneMoto.../0/14eGQi5pNSU
Last edited by Rotary-Works.com; 07-29-10 at 02:41 AM.
#369
The Firestarter
About the FC TII Throttle body, have you thought about making it so that its possible to use the shorter N/A throttle cable, instead of the TII cable that snakes around the top portion of the engine?
#370
Rotary Enthusiast
iTrader: (8)
Join Date: Nov 2004
Location: Long Beach, CA
Posts: 1,020
Likes: 0
Received 0 Likes
on
0 Posts
I bought his FD V-mount $ radiator combo kit, and it is BAD ***, havent installed it yet. great looking products, that new elbow is dope. Rene always makes some top notch products,and at a good affordable price I am still going to get the turbo header and turbo from him, and get it tuned etccc, good thing I am Local.
Thanks for the installing my headers on my white FC, it runs like a champ.
-William
Thanks for the installing my headers on my white FC, it runs like a champ.
-William
#374
QM
iTrader: (9)
Join Date: Apr 2008
Location: Chandler, AZ
Posts: 485
Likes: 0
Received 0 Likes
on
0 Posts
My throttle body is awesome, except the big allen bolts that came with it were about 3/8" too long. I also had to adjust my throttle cable out to as long as it goes, but that part was expected. Can't wait to finish up this car and see what kind of numbers it makes.
#375
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
I have a Question.
Will the FC Vmount IC kit allow me to run a SHINE hood(sexy fc style Vented hood)?
I already have your FD TB in transit.(fd version for an Fd upper on an FC).
I am also wondering If you Guys are going to make a HI Output FD alternator.
I am looking at the Gilmer drive setup too.
Thanks.
Will the FC Vmount IC kit allow me to run a SHINE hood(sexy fc style Vented hood)?
I already have your FD TB in transit.(fd version for an Fd upper on an FC).
I am also wondering If you Guys are going to make a HI Output FD alternator.
I am looking at the Gilmer drive setup too.
Thanks.