[For Sale] LRB Speed SA/FB/FC/FD Parts!
#26
Registered User
Thread Starter
iTrader: (1)
Join Date: Jun 2015
Location: Hudson
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
The FD vents are on the to do list!
We have 3 new products we've added to the site.
First up, the FC Throttle Body Flange! Make your own elbow/charge pipe for custom applications when stock/aftermarket cast elbows won’t do the job. CNC plasma cut from 3/8″ (9.52mm) thick aluminum to exact specifications, all that’s left is for you to fabricate & weld the remainder of the elbow.
FC Throttle Body Flange |
Next, is our FC cup holder! Tired of spilling your drink holding it precariously in one way or another? Have your passenger annoyed with you for making them into your “default” cup holder? Those issues have met their end with the LRB Speed cup holder. Factory power mirror switch has a spot to fit as well. Simply un-clip the switch from your old panel insert, pop it into this, and then install into the center console. Clips in place and can be reversed.
FC Cup Holder |
And lastly, we are now offering Full aluminum FC Door panels. Precision made by CNC plasma cutting out of 0.063″ aluminum sheet, then finished with an orbital sander and bent, these are ready to be installed, or painted/powder coated to your desired color. The factory inner window seal/wiper from the OEM door panel attaches to the panel as well, so there’s no rattles/scratching from the glass contacting it. Finish off your race cars interior today!
The set in this listing will fit 86-91 COUPES, but hasn’t yet been tested on convertibles. Pictured is a cut out for a crank window and power window switch. Please let us know in the notes at check out, which provisions you require as well as pull strap color. We can also do custom logos/cutouts for an additional fee if you are interested, just ask!
All stainless steel mounting hardware IS included, again this is a bolt on and go kit.
FC Full Aluminum Door Panel |
We have 3 new products we've added to the site.
First up, the FC Throttle Body Flange! Make your own elbow/charge pipe for custom applications when stock/aftermarket cast elbows won’t do the job. CNC plasma cut from 3/8″ (9.52mm) thick aluminum to exact specifications, all that’s left is for you to fabricate & weld the remainder of the elbow.
FC Throttle Body Flange |
Next, is our FC cup holder! Tired of spilling your drink holding it precariously in one way or another? Have your passenger annoyed with you for making them into your “default” cup holder? Those issues have met their end with the LRB Speed cup holder. Factory power mirror switch has a spot to fit as well. Simply un-clip the switch from your old panel insert, pop it into this, and then install into the center console. Clips in place and can be reversed.
FC Cup Holder |
And lastly, we are now offering Full aluminum FC Door panels. Precision made by CNC plasma cutting out of 0.063″ aluminum sheet, then finished with an orbital sander and bent, these are ready to be installed, or painted/powder coated to your desired color. The factory inner window seal/wiper from the OEM door panel attaches to the panel as well, so there’s no rattles/scratching from the glass contacting it. Finish off your race cars interior today!
The set in this listing will fit 86-91 COUPES, but hasn’t yet been tested on convertibles. Pictured is a cut out for a crank window and power window switch. Please let us know in the notes at check out, which provisions you require as well as pull strap color. We can also do custom logos/cutouts for an additional fee if you are interested, just ask!
All stainless steel mounting hardware IS included, again this is a bolt on and go kit.
FC Full Aluminum Door Panel |
#30
Registered User
Thread Starter
iTrader: (1)
Join Date: Jun 2015
Location: Hudson
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
Yep, we have taps for both 88 & older, as well as 89& newer. Can weigh as much as 3 ounces depending on **** shape, when I weight them (hollow out internally; fill with brass powder)
#31
Registered User
Thread Starter
iTrader: (1)
Join Date: Jun 2015
Location: Hudson
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys - from now until November 15th we are offering 15% off our alumunium undertray and aero panel when purchased as a set! Use the coupon code 7club-undertray at checkout!
For those that don't know- the undertray replaces the factory plastic undertray that's frequently damaged &/or missing on most FCs. It accounts for a great deal of cooling above 25mph, as it forces air up through the oil cooler/radiator while in motion. The aero panel, sits behind the undertray, and is coupe or convertible specific (we do carry both models however!). It's a replica of a rare factory aero panel, which was found only on the 86-87 sport, 88 T2 & 88 GTU. In conjunction with the remainder of the aero kit, Mazda published data showed it reduced the coefficient of drag from .31 to .29. Get both for 15% during this limited offer!!
For those that don't know- the undertray replaces the factory plastic undertray that's frequently damaged &/or missing on most FCs. It accounts for a great deal of cooling above 25mph, as it forces air up through the oil cooler/radiator while in motion. The aero panel, sits behind the undertray, and is coupe or convertible specific (we do carry both models however!). It's a replica of a rare factory aero panel, which was found only on the 86-87 sport, 88 T2 & 88 GTU. In conjunction with the remainder of the aero kit, Mazda published data showed it reduced the coefficient of drag from .31 to .29. Get both for 15% during this limited offer!!
Last edited by LRB Speed; 10-27-15 at 03:11 PM.
#34
Registered User
Thread Starter
iTrader: (1)
Join Date: Jun 2015
Location: Hudson
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
Hope you guys were able to hop on the 15% off offer.
We just added 4 new products to our site today!
Lets start it of with the one we are most excited about. We are finally producing FD Aluminum dash vents! Our vent is a one piece design that will never crack or deteriorate like the factory plastics. CNC cut and finished with an oribtal sander for uniform finish, our vent is ready for polishing our paint color of your choice! All hardware for installation included! LRB logo is optional. Available HERE: FD Aluminum Defrost Vent |
Next up we have Series 1 RX8 OMP block off plates. CNC Cut and ready to be dropped in. All hardware included! Available HERE: S1 RX8 OMP Block off plate |
Next up is a bit unrelated - but we are hoping you can share them to friends who may be interested! We are releasing our AE86 Aluminum door panels, same as above - all hardware included and polished to a uniform finish. These can be custom designed to have any logo, design or text cut out in the panel. Extra fees apply. Find them HERE: http://lrbspeed.com/product/ae86-aluminum-door-panels/
Last up is for the domestic guys! We now have aluminum under trays for New Edge generation m00-stan - I mean mustang! Find them HERE: New Edge Mustang Undertray |
We just added 4 new products to our site today!
Lets start it of with the one we are most excited about. We are finally producing FD Aluminum dash vents! Our vent is a one piece design that will never crack or deteriorate like the factory plastics. CNC cut and finished with an oribtal sander for uniform finish, our vent is ready for polishing our paint color of your choice! All hardware for installation included! LRB logo is optional. Available HERE: FD Aluminum Defrost Vent |
Next up we have Series 1 RX8 OMP block off plates. CNC Cut and ready to be dropped in. All hardware included! Available HERE: S1 RX8 OMP Block off plate |
Next up is a bit unrelated - but we are hoping you can share them to friends who may be interested! We are releasing our AE86 Aluminum door panels, same as above - all hardware included and polished to a uniform finish. These can be custom designed to have any logo, design or text cut out in the panel. Extra fees apply. Find them HERE: http://lrbspeed.com/product/ae86-aluminum-door-panels/
Last up is for the domestic guys! We now have aluminum under trays for New Edge generation m00-stan - I mean mustang! Find them HERE: New Edge Mustang Undertray |
Thread
Thread Starter
Forum
Replies
Last Post