Godspeed Project Aluminum Radiator for 1993-1997 RX-7 FD $170 Shipped!!!!
#1
Godspeed Project Aluminum Radiator for 1993-1997 RX-7 FD $170 Shipped!!!!
On sale now just for RX7club.com members is our Godspeed Project Full Aluminum Radiators for the 1993-1997 Mazda RX-7 FD for only $170 shipped!!!
We can also throw in an additional 12" slim electric fan for additional $30 for each fan with purchase of our radiators!
RADIATOR SPEC:
core size- 313X618X52mm (core size)
INLET / OUTLET: 1 3/8"
- 100% light weight aluminum
- direct bolt-on
- perfect for street or strip
- 40% more cooling efficient then stock
manual transmission only!
PM ME for payment options or any questions!
Install pictures can be found here: http://www.godspeedproject.com/store...products_id=61
The slim fan:
Fatboy Garage Motorsport Inc
GODSPEED Project
2518 Continental Ave
El Monte CA 91733
P: 626-442-3988 ASK FOR ABE
W:godspeedproject.com
We can also throw in an additional 12" slim electric fan for additional $30 for each fan with purchase of our radiators!
RADIATOR SPEC:
core size- 313X618X52mm (core size)
INLET / OUTLET: 1 3/8"
- 100% light weight aluminum
- direct bolt-on
- perfect for street or strip
- 40% more cooling efficient then stock
manual transmission only!
PM ME for payment options or any questions!
Install pictures can be found here: http://www.godspeedproject.com/store...products_id=61
The slim fan:
Fatboy Garage Motorsport Inc
GODSPEED Project
2518 Continental Ave
El Monte CA 91733
P: 626-442-3988 ASK FOR ABE
W:godspeedproject.com
#4
2 FD's since '98
iTrader: (11)
Is this a pic of the actual FD radiator? Looks like the in/outlets are in non-conventional positions. And, the provisions for the factory fans aren't there.
I am intrested because I DON'T want the lower pipe in the factory spot, but would like factory fan provisions. The regular outlet puts the pipe really close to an LS1 crank pulley, so you have to have some silly bends in it.
Thanks.
I am intrested because I DON'T want the lower pipe in the factory spot, but would like factory fan provisions. The regular outlet puts the pipe really close to an LS1 crank pulley, so you have to have some silly bends in it.
Thanks.
Trending Topics
#16
This radiator will fit but you need to purchase an aftermarket AST.
Write up can be found here: http://www.rx7.org/Robinette/coolant_tank.htm
Write up can be found here: http://www.rx7.org/Robinette/coolant_tank.htm
Thread
Thread Starter
Forum
Replies
Last Post