sexy time
#1
Rotary Enthusiast
Thread Starter
sexy time
still have to adjust valvetrain and check piston to valve clearance, but she's coming together.
Let me know if you'd like the spec's / goodies. It's going in an SA build
#4
Rotary Enthusiast
Thread Starter
1980 SA is what it's in. almost ready to start it up....damn it's taken a long time
the intake is aluminum, just painted black
the intake is aluminum, just painted black
#6
Rotary Enthusiast
Thread Starter
she lives!
Trending Topics
#8
Senior Member
Awesome. So rewarding to hear it run.
Any chance you have some pictures that show the radiator mounting? I have the granny's kit and wish he included some pictures in his instructions.
Any chance you have some pictures that show the radiator mounting? I have the granny's kit and wish he included some pictures in his instructions.
#9
Rotary Enthusiast
Thread Starter
IM me your number and i will text whatever pics you like. PIA putting everything on photobucket
#12
Rotary Enthusiast
Thread Starter
T5 5 speed from 90 camaro. It's the only one with overdrive. very hard to find. probably would go with T56 if I did it a second time. Should get 375-425 hp. It's 10.5:1 compression.
The following users liked this post:
RRacerX (02-22-22)
#14
Rotary Enthusiast
Thread Starter
#15
Rotary Enthusiast
Thread Starter
the major body work is finished
#16
Rotary Enthusiast
Thread Starter
#17
Rotary Enthusiast
Thread Starter
I laid down a few 50-100 feet drag marks barely getting on it. yeah, posi works and limited slip kicked in when she squiggled a little. couldn't be happier!
The following users liked this post:
RRacerX (02-22-22)
#18
Rotary Enthusiast
Thread Starter
oh and the tingling in the video is just the speedo cable dragging
#19
Senior Member
Nice work, I hope I can do a proper test of my car next weekend, need to do the exhaust this week
Also how are you holding your door cards in? reusing the plastic snaps?
Also how are you holding your door cards in? reusing the plastic snaps?
Last edited by Freeskier7791; 04-04-16 at 03:24 PM.
#20
Rotary Enthusiast
Thread Starter
I made the door panels, just copied the old ones.
I am using the metal clips that came with mine.... I think some have plastic, but mine are metal. The rubber grommets that go into the holes on the metal part of the door are useless now, and probably pretty hard to find. I'll probably just put some electrical tape around the metal clip so there's no creaking or anything. hopefully you can picture what i'm saying.
I am using the metal clips that came with mine.... I think some have plastic, but mine are metal. The rubber grommets that go into the holes on the metal part of the door are useless now, and probably pretty hard to find. I'll probably just put some electrical tape around the metal clip so there's no creaking or anything. hopefully you can picture what i'm saying.
#21
Rotary Enthusiast
Thread Starter
also just ordered the seat covers from racing beat and matching material for the doors. will also cover the kick plates i made which go down by your feet. getting there.....
#22
Senior Member
I made the door panels, just copied the old ones.
I am using the metal clips that came with mine.... I think some have plastic, but mine are metal. The rubber grommets that go into the holes on the metal part of the door are useless now, and probably pretty hard to find. I'll probably just put some electrical tape around the metal clip so there's no creaking or anything. hopefully you can picture what i'm saying.
I am using the metal clips that came with mine.... I think some have plastic, but mine are metal. The rubber grommets that go into the holes on the metal part of the door are useless now, and probably pretty hard to find. I'll probably just put some electrical tape around the metal clip so there's no creaking or anything. hopefully you can picture what i'm saying.
#23
Rotary Enthusiast
Thread Starter
oh, forgot. that's exaclt what I am using ti attach the top metal piece to the composite/wood (whatever it is) door piece..... rivets! I lined em all up, drilled the holes and just soaked the top metal piece in vinegar water and cleaned and painted it. it's not in the picture, but yeah, I am using rivets.