RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   V-8 Powered RX-7's (https://www.rx7club.com/v-8-powered-rx-7s-299/)
-   -   NEW car still the same 2jz-gte/rx7 project... (https://www.rx7club.com/v-8-powered-rx-7s-299/new-car-still-same-2jz-gte-rx7-project-681469/)

jimlab 08-24-07 06:52 PM


Originally Posted by roachdiddy (Post 7266544)
NOTICE THE WELDS ARE NOT FINISHED!!!!!!!!

Notice that we don't care.


was changed an extream amount
What's an "extream" amount?


you must have lazers for eyes to measure mm with a picture! haha
Or more likely, you're a moron.

roachdiddy 08-26-07 04:28 PM


Originally Posted by jimlab (Post 7269208)
Notice that we don't care.

What's an "extream" amount?

Or more likely, you're a moron.

ohhh, did i hurt your feelings!?! my bad im sorry. lol your the kinda guy who doesnt have the money to do a build like this... so you just search for problems in other peoples projects! and when you THINK you found it you run with it... leave the thread alone and go bug other people.

jimlab 08-26-07 06:11 PM


Originally Posted by roachdiddy (Post 7273694)
your the kinda guy who doesnt have the money to do a build like this.

That's actually pretty funny. :)

fastrx7man 08-26-07 10:49 PM

It's interesting how many threads end up where this one is...

If the truth be known Matt (roachdiddy) is a super cool guy. He is going down a path with his car that few have attempted. I think when its complete the car is going to be awesome...Matt will probably be answering lots of questions from many RX7 owners in the future who are wanting to drop a 2JZ under the hood...

Oh and by the way I want to drive the car once it's complete.....

themonsterisme 08-27-07 12:29 AM

rx7club is lame
 
the amount of "know it alls" who post on here is staggering....the guy was answering all the questions being asked yet stupid dumb fucks have to ruin it for everyone....bro...i think your project is sweet....dont mind the douche bags on this site....most of them are just wishing they could do a build like yours anyways...heh:icon_tup:

jimlab 08-27-07 12:37 AM


Originally Posted by themonsterisme (Post 7274972)
dont mind the douche bags on this site....most of them are just wishing they could do a build like yours anyways...

Ga-huh, yah sure, that's what we're all wishing. :rolleyes:

No, all that anyone wanted was a straight answer on how far the steering rack was moved, but even the dipshit who owns the car doesn't know, and now we have some stupid cunt with a handful of posts telling us how jealous we are of this project. Does that about sum it up?

roachdiddy 08-27-07 08:44 AM


Originally Posted by jimlab (Post 7274991)
Ga-huh, yah sure, that's what we're all wishing. :rolleyes:

No, all that anyone wanted was a straight answer on how far the steering rack was moved, but even the dipshit who owns the car doesn't know, and now we have some stupid cunt with a handful of posts telling us how jealous we are of this project. Does that about sum it up?

how about this??? when the project is all done. I will pull it up to my other rx7 and measure 10 diff ways to get you and exact number on how far/if at all the steering rack has moved??? does that work for you?

roachdiddy 08-27-07 08:45 AM


Originally Posted by jimlab (Post 7274991)
Ga-huh, yah sure, that's what we're all wishing. :rolleyes:

No, all that anyone wanted was a straight answer on how far the steering rack was moved, but even the dipshit who owns the car doesn't know, and now we have some stupid cunt with a handful of posts telling us how jealous we are of this project. Does that about sum it up?

2nd..... what do you drive??

carx7 08-27-07 09:10 AM


Originally Posted by roachdiddy (Post 7275510)
2nd..... what do you drive??


Getting popcorn....

BUT, I do like the car and am interested too in seeing how the bump steer works out for you. Many people have tried this before, none (to my knowledge) have been successful and I’m sure that is what is driving the skepticism from others in the post.

themonsterisme 08-27-07 10:33 AM

lol
 

Originally Posted by jimlab (Post 7274991)
Ga-huh, yah sure, that's what we're all wishing. :rolleyes:

No, all that anyone wanted was a straight answer on how far the steering rack was moved, but even the dipshit who owns the car doesn't know, and now we have some stupid cunt with a handful of posts telling us how jealous we are of this project. Does that about sum it up?

you are too easy.....no wonder you get flamed on here all the time:rlaugh:

themonsterisme 08-27-07 10:37 AM

oh...
 
and i forgot....you have to have 9000 post to be cool like jimlab right....?....go fuck yourself you computer nerd:rlaugh:

jimlab 08-27-07 02:13 PM


Originally Posted by roachdiddy (Post 7275507)
how about this??? when the project is all done. I will pull it up to my other rx7 and measure 10 diff ways to get you and exact number on how far/if at all the steering rack has moved??? does that work for you?

Why would you wait until the project is done and then figure out how you changed your steering geometry? Why don't you know something that important now?


2nd..... what do you drive??
Do your own research.

jimlab 08-27-07 02:15 PM


Originally Posted by carx7 (Post 7275555)
Many people have tried this before, none (to my knowledge) have been successful and I’m sure that is what is driving the skepticism from others in the post.

Precisely. The 2JZ either fits under the hood and the steering rack moves, or the steering rack stays where it is and the engine hangs out of the hood. You can't have it both ways.

jimlab 08-27-07 02:18 PM


Originally Posted by themonsterisme (Post 7275743)
you are too easy.....no wonder you get flamed on here all the time :rlaugh:

Do you feel better now that you got your worthless little opinion posted for everyone to see?

Good. Now go play in the lounge where you belong.

roachdiddy 08-27-07 05:28 PM


Originally Posted by jimlab (Post 7276468)
Why would you wait until the project is done and then figure out how you changed your steering geometry? Why don't you know something that important now?

Do your own research.

bc i have to reinstall the k member into my other rx7. or id have the numbers for you right now.

themonsterisme 08-27-07 07:44 PM

lol
 

Originally Posted by jimlab (Post 7276489)
Do you feel better now that you got your worthless little opinion posted for everyone to see?

Good. Now go play in the lounge where you belong.

actually...id feel better if you were attacked and violently raped by a pack of rabid goats....but...we cant all get what we want can we?...lol:fingersx:

mr2foryou 08-27-07 08:09 PM

roachdiddy:I love the swap. It looks nice and I can guarantee it'll be very fast/make nice power when it's all done. I love the 2JZ engine and the body of the RX-7; what better combo. Keep up the hard work and keep us all posted on the progress.

Dee E.

PDViper77 08-27-07 08:27 PM

Thats a sweet swap bro.

Narfle 08-27-07 09:15 PM

JimLab: Your project is no closer to the road than roach's regardless of his ignorance. You don't "drive" anything comparable, nor does he. Nice pissing contest though. Youre both grade A douchbags.

jimlab 08-27-07 09:39 PM


Originally Posted by roachdiddy (Post 7277141)
bc i have to reinstall the k member into my other rx7. or id have the numbers for you right now.

Then why not say so instead of "the steering rack was moved in mm, if moved at all. so no compensation needed"?

jimlab 08-27-07 09:43 PM


Originally Posted by themonsterisme (Post 7277607)
actually...id feel better if you were attacked and violently raped by a pack of rabid goats....

I can see you've come a long way in the year or so you've been around. How's that 20B swap coming, BTW?

https://www.rx7club.com/3rd-generation-specific-1993-2002-16/telephone-pole-1-rx7-0-a-554181/

jimlab 08-27-07 09:45 PM


Originally Posted by Barban (Post 7277902)
JimLab: Your project is no closer to the road than roach's regardless of his ignorance. You don't "drive" anything comparable, nor does he. Nice pissing contest though. Youre both grade A douchbags.

Barban: You're still an ignorant cunt, and this has absolutely nothing whatsoever to do with comparing cars or projects. Thanks for trying.

Narfle 08-27-07 10:28 PM


Originally Posted by jimlab (Post 7278038)
Barban: You're still an ignorant cunt, and this has absolutely nothing whatsoever to do with comparing cars or projects. Thanks for trying.

You are very welcome, sir. I am sure the online community's hatred for you is rivaled only in your personal relationships.

jimlab 08-27-07 11:39 PM


Originally Posted by Barban (Post 7278181)
You are very welcome, sir. I am sure the online community's hatred for you is rivaled only in your personal relationships.

I wish I knew you personally. It would be interesting to see what an intellect as prodigious as yours is capable of when you're not squandering it by making asinine posts in a forum you have no real business in, but apparently can't stay away from...

:rlaugh:

themonsterisme 08-28-07 02:15 AM

actually...
 

Originally Posted by jimlab (Post 7278031)
I can see you've come a long way in the year or so you've been around. How's that 20B swap coming, BTW?

https://www.rx7club.com/showthread.php?t=554181

you see jim...i have a life...a life that doesnt have me sitting in front of a computer trying to look cool trying to make people feel shitty...more than likely you life sucks so you take it out on other people whos life doesnt just so you can feel a little better about yourself....im sure your mom is proud of her wonderboy....from what i can tell all you do is sit on rx7club searching for threads to spam....you know...a simple courtious question would have been appropriate to ask...but no....your a dick....being a helpful informative person trying to help out others on this rx7 forum is too hard isnt it?.....why is there so many people who act like they know it all yet act just like you?.....what good does it do this community other than give this site a bad name for supporting people like you to do what you do?....helping others with problems or asking for help on this forum is what it should be here for...but no....we get you jimlab.....:wallbash:


All times are GMT -5. The time now is 09:12 PM.


© 2024 MH Sub I, LLC dba Internet Brands