eskapee

ls1 swap now tails sides and brake lights dont work?


I have a 93 rx7 with an ls1 swap. My tail lights, Side/running lights, turns, and brake lights do not work now. I have done a lot of things TNS relay, fuses etc etc.. Did a lot of searching on this website and others and now have to ask for help.

would any of the wires off x14 connector be the cause. I have a lot of unused wires on it. I have not connected my reverse lights up yet would that affect it? Of anything with a swap ls1 that would affect. My biggest problem is the car was not road worthy when I got it and I never check these wires before the swap. So I have no Idea if PO did something etc...

Just looking for some help anything at this point. I will soon just rewire them all if I cant figure it out.

Anyone in the Albuquerque area that could also swing by and lend a hand would be a bonus and will be compensated etc...

I need this done so I can finish my car and get it on the road etc... Please Help!!!!

digitalsolo

iTrader: (2)

X14 should not effect that.

Do your dash lights work?

-Blake

eskapee

At first no lights worked. I got the head lights to work now. Windows and locks and fan blower etc work in the interior. Besides that no gauges not lights no running lights and no turns or brakes. I know it has to be something simple like a ground or something but cant figure it out.

By the way I appreciate your help!

TEDDER1

iTrader: (1)

Power to the front relays?