5.0 swap wiring HELP
#1
Can Post Only in New Member Section
Thread Starter
Join Date: Oct 2012
Location: El Paso TX
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
5.0 swap wiring HELP
k so I'm pretty much done with my 5.0 swap in my 90 rx7 everything is mounted and good to go. the only thing I really need help with is the wiring. I have seen many write up for the 1st gen and a lot of write up for an LS swap but I have not been able to find a write up on the wiring for a 5.0 to a rx7. and yes I have used the search button but maybe I'm just not looking in the right places. any help would be great. Thanks
pretty much I’m looking for a write up that tells me what wire goes where kind of a wring for dummy’s lol thanks again for everyone’s help.
pretty much I’m looking for a write up that tells me what wire goes where kind of a wring for dummy’s lol thanks again for everyone’s help.
#2
Check with this guy below- not sure if it helps, but though I would show you a thread I read. Good luck!
10-14-13, 01:49 PM #1
reyracing
New Member
Trader Score: (0)
Join Date: Oct 2013
Location: dover
Posts: 8
new member 5.0 fb rx7
hi ppl my name is rey from new jersey and i own a 1985 mazda rx7 5.0 powered still a project getting done slowly but surely ..
10-14-13, 01:49 PM #1
reyracing
New Member
Trader Score: (0)
Join Date: Oct 2013
Location: dover
Posts: 8
new member 5.0 fb rx7
hi ppl my name is rey from new jersey and i own a 1985 mazda rx7 5.0 powered still a project getting done slowly but surely ..
#4
Full Member
Join Date: Sep 2013
Location: fraser valley british columbia , Canada
Posts: 50
Likes: 0
Received 1 Like
on
1 Post
Which wiring do you need ? The cars or the 5.0 ? I have a chiltons rx 7 for a fb but may stiil have mustang wiring .not sure if the fb book would though . . By the way your car looks pretty sweet.
Last edited by 79v8fb; 11-25-13 at 09:27 AM.
#5
Can Post Only in New Member Section
Thread Starter
Join Date: Oct 2012
Location: El Paso TX
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
the engine harness is a 5.0 harness i need to mate the engine harness to the car harness together. thanks for the props on the car it is still a work in progress if i could figure out how to post pic in the forum i would do a build fourm lol
#6
BlackFC-TII
Join Date: Jul 2005
Location: Saint Louis, Mo
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
Might want to pop over to Grannys website, they have a decent write overview of the wiring for both Speed density and mass air mustang 5.0 harnesses:
http://members.tripod.com/~grannys/2...ructions8.html
http://members.tripod.com/~grannys/2...ructions7.html
http://members.tripod.com/~grannys/2...ructions8.html
http://members.tripod.com/~grannys/2...ructions7.html
Thread
Thread Starter
Forum
Replies
Last Post
The Shaolin
2nd Generation Specific (1986-1992)
9
09-14-15 07:50 PM