302 into a FB
#1
Full Member
Thread Starter
Join Date: Mar 2006
Location: Charlotte NC
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
302 into a FB
I recently purchased an 1985 GSL pretty much for the purpose of putting a V8 in it.
Ive been looking for a decent write up on the process, but have fallen a bit short.
Im looking to install a carbed 302 with a T5 into my GSL. Im sure out there somewhere is a write up on what all is involved, wiring wise, clutch, shifter ect.
Can someone point me in the right direction, I cant find much info/help on the V8rx7forum regarding the FB.
Thanks
Ive been looking for a decent write up on the process, but have fallen a bit short.
Im looking to install a carbed 302 with a T5 into my GSL. Im sure out there somewhere is a write up on what all is involved, wiring wise, clutch, shifter ect.
Can someone point me in the right direction, I cant find much info/help on the V8rx7forum regarding the FB.
Thanks
#2
Junior Member
Join Date: Jan 2009
Location: Houston, Tx
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
grannys has instructions for swap, easy install, also has info on pinion swaps for gears.
Wiring would be simple for carb install, I dont think you have to use dog-leg shifter for fb.
Basically, its a bolt in install. You get the install instructions with their kit.
If your fb was fuel injected, you have to use carburated 12a crossmember for the install, or it wont fit
Wiring would be simple for carb install, I dont think you have to use dog-leg shifter for fb.
Basically, its a bolt in install. You get the install instructions with their kit.
If your fb was fuel injected, you have to use carburated 12a crossmember for the install, or it wont fit
Thread
Thread Starter
Forum
Replies
Last Post