S4 TII @ the strip
S4 TII @ the strip
Should have been faster but popped off a few vac lines. Was only 10-11psi, should have been 14-15
Ran a 13.8 the other night.
R/T was .7, the suck.
Speed was 104
Mods:
Banzai TID
RB 3" turbo back
RB sway bars
Intrax springs
KYB AGX
Rtek 1.7
Walbro 255
BNR stage 1
Ran a 13.8 the other night.
R/T was .7, the suck.
Speed was 104
Mods:
Banzai TID
RB 3" turbo back
RB sway bars
Intrax springs
KYB AGX
Rtek 1.7
Walbro 255
BNR stage 1
Trending Topics
Should have been faster but popped off a few vac lines. Was only 10-11psi, should have been 14-15
Ran a 13.8 the other night.
R/T was .7, the suck.
Speed was 104
Mods:
Banzai TID
RB 3" turbo back
RB sway bars
Intrax springs
KYB AGX
Rtek 1.7 <--------------------
Walbro 255
BNR stage 1
Ran a 13.8 the other night.
R/T was .7, the suck.
Speed was 104
Mods:
Banzai TID
RB 3" turbo back
RB sway bars
Intrax springs
KYB AGX
Rtek 1.7 <--------------------
Walbro 255
BNR stage 1
im not bragging im just think that he should be able to do better with that setup . Yeah still have other knuckle but the bearing is bad on it, i have the Dtss bushing ready to go just need the bearing. I soon as i get it and get the old one off i give it to ya
Last edited by Noel Caraballo; Oct 6, 2007 at 03:36 PM.
all you have for fuel control is an rtek1.7? i might be wrong here but i thought that it didnt adjust fuel and an rtek1.7 with 720cc secondaries produced the same amount of fuel as stock with 550's unless you have a safc?
how is it bull ****, obviously you dont know what you doing sorry to say. Yes i have a little of weight reduction and some wide *** tires in the back. I maybe was boost creeping ten pounds.
Thread
Thread Starter
Forum
Replies
Last Post
MidnightOwl
2nd Generation Specific (1986-1992)
1
Sep 25, 2015 10:24 PM





