Only 105kw/323Nm please help!
#1
Junior Member
Thread Starter
Join Date: Mar 2004
Location: sydney
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Only 105kw/323Nm please help!
my friend just got his rx7 series 4 with a TII motor tuned (running 5 psi) and it just made 105 kw after about 6 or 7 dyno runs?
car has only 3inch exhaust from turbo
aftermarket ECU
can someone please help or explain why
Any help would be appreciated Thanks
car has only 3inch exhaust from turbo
aftermarket ECU
can someone please help or explain why
Any help would be appreciated Thanks
#2
So close to 12's!!!
Join Date: Aug 2003
Location: Canada
Posts: 395
Likes: 0
Received 0 Likes
on
0 Posts
What were the AFR's like on the dyno? Its tough to try to pinpoint the problem when no information was given. 105kw is about 140hp. What kind of ECU? What does he have for fuel modifications if any? Sounds like hes running overally rich.
#3
Junior Member
Thread Starter
Join Date: Mar 2004
Location: sydney
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
A/F ratios i dont know....the car has a EMS installed..not sure if it was running rich didnt look like it was, no fuel mods just standard fuel pump....future mods he plans is FMIC and a better manifold(screamer pipes) he plans to push 180-190 hp at the wheels on max 7psi
do you think this is possible??
do you think this is possible??
Trending Topics
#8
Will Work For Apex Seals
Join Date: Jan 2004
Location: Lower NY
Posts: 1,277
Likes: 0
Received 0 Likes
on
0 Posts
and the 1st gear ratio is signifigantly lower, cause slower acceleration, and with 4 gears your in Overdrive much sooner.....its made for people who just want to from point A to point B, not people who want to go from point A to B as fast as possible