Got a new personal best tonight
#1
Goes *round*round*round*
Thread Starter
Join Date: Apr 2003
Location: San Antonio
Posts: 718
Likes: 0
Received 0 Likes
on
0 Posts
Got a new personal best tonight
Went out there with a few people, met a few new people and had a few good runs. Managed to get a consistent average between 14.1 and 14.3 with a best of 13.58! Last time I was at the track was ~3yrs ago and ran a 14.9X best. I'd say it's an improvement.
Pics:
Pics:
#3
Goes *round*round*round*
Thread Starter
Join Date: Apr 2003
Location: San Antonio
Posts: 718
Likes: 0
Received 0 Likes
on
0 Posts
That was cold too. No burnouts or even a few wheel spins.
I figure that since I'm pretty much at my max power (that I feel safe with) since my injectors are probably nearing 90% duty, I'm just going to adjust my technique for now. Lower the tire pressure and soften my rear shocks and work on my RT and maybe I can get to 13.00.
I figure that since I'm pretty much at my max power (that I feel safe with) since my injectors are probably nearing 90% duty, I'm just going to adjust my technique for now. Lower the tire pressure and soften my rear shocks and work on my RT and maybe I can get to 13.00.
#5
Goes *round*round*round*
Thread Starter
Join Date: Apr 2003
Location: San Antonio
Posts: 718
Likes: 0
Received 0 Likes
on
0 Posts
Stock turbo
Stock wastegate (I really should've ported that by now, will soon)
Stock bov
Streetport
FCD
FD Fuel pump
K&N Cone
RB turboback
TB mod sans OMP removal
V-mount using a 3" Griffin rad and an Evo8 IC with piping I made
Pretty much everything I can until I get a computer. I'm get a VAFC2 for a good price so I'm thinkin that and some 720s will tide me over until I start getting into the really expensive stuff.
Stock wastegate (I really should've ported that by now, will soon)
Stock bov
Streetport
FCD
FD Fuel pump
K&N Cone
RB turboback
TB mod sans OMP removal
V-mount using a 3" Griffin rad and an Evo8 IC with piping I made
Pretty much everything I can until I get a computer. I'm get a VAFC2 for a good price so I'm thinkin that and some 720s will tide me over until I start getting into the really expensive stuff.
#7
Goes *round*round*round*
Thread Starter
Join Date: Apr 2003
Location: San Antonio
Posts: 718
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, I realized after the fact that I was probably running them a bit hard. It was my first time there in years and I didn't realize I was going to go that fast/put down that much power.
Trending Topics
#8
RE_p Rotors
iTrader: (7)
Join Date: Dec 2006
Location: Newport News/Fredericksburg
Posts: 950
Likes: 0
Received 0 Likes
on
0 Posts
yea time for some 720 or 850 secondaries and rtech ecu prob 1.7 min..good times i cant wait to go to the track after new rebuild and lots of mods..best i ran was 14.8 with little mods...
#11
You guys have chance to be able to go to the track. Here i have around 8 foot of snow in front my house and the track is far from being open. The Rx is sleeping in the garage...
#13
Goes *round*round*round*
Thread Starter
Join Date: Apr 2003
Location: San Antonio
Posts: 718
Likes: 0
Received 0 Likes
on
0 Posts
I was running ~12psi (probably close to maxing my secondaries). Unfortunatly I just totaled it last saturday. No track time for a while...but with more improvements then.
Thread
Thread Starter
Forum
Replies
Last Post