What is the bnr 1/4 record?
#1
supra7
Thread Starter
iTrader: (10)
Join Date: Nov 2004
Location: Mississippi
Posts: 414
Likes: 0
Received 0 Likes
on
0 Posts
What is the bnr 1/4 record?
I been looking and digging but can't find really much on it but bits and pieces here and there. So what is the record on bnr twins 1/4 times and mph? I know about all that's been done with the stock kids so just bnr info. If I just made a duplicate thread then link me to it and lock this one.
Thanks
Thanks
#3
supra7
Thread Starter
iTrader: (10)
Join Date: Nov 2004
Location: Mississippi
Posts: 414
Likes: 0
Received 0 Likes
on
0 Posts
Yea I know about him. But I thought I read some where on here brain saying that a friend of his trapped 130....so the record for them must be lower than the stock twins. Well I guess I need to go after that mark then as soon as I get mine here
#4
Rotary Freak
iTrader: (28)
Join Date: Jun 2009
Location: Ontario, Canada
Posts: 2,089
Likes: 0
Received 0 Likes
on
0 Posts
^holy!
I'm a newbie. I did 13.6 @112mph. I had no suspension mods and cheap tires so I either spun or bogged out.
To give you an idea how crappy a driver I am my buddy running less boost did 13.3 @ 108mph.
I'm confident my setup could hit mid 12's if I had better tires and a experienced driver.
I'm a newbie. I did 13.6 @112mph. I had no suspension mods and cheap tires so I either spun or bogged out.
To give you an idea how crappy a driver I am my buddy running less boost did 13.3 @ 108mph.
I'm confident my setup could hit mid 12's if I had better tires and a experienced driver.
Trending Topics
#11
Turbo Lover
iTrader: (6)
Join Date: Feb 2003
Location: Cleveland
Posts: 783
Likes: 0
Received 0 Likes
on
0 Posts
The current record for stock twins is 10.86 with 411whp at 22psi
The current power record for BNR's is 426whp at 18psi
With the proper setup and driver you should theoretically be able to beat the 10.86. Of course that guys car has also been lightened to just under 2,600lbs.
The current power record for BNR's is 426whp at 18psi
With the proper setup and driver you should theoretically be able to beat the 10.86. Of course that guys car has also been lightened to just under 2,600lbs.
#12
Rotary Enthusiast
iTrader: (5)
My peak hp of 411 was at 6500 rpm and at that point the boost has fallen off to about 18 psi. Peak boost hits 22 psi when full boost hits, but then boost drops down. also made a little over 400 HP at 5500 rpm probably 20-21 psi, but then boost falls off due to The stock turbos probably not being able to hold that much boost at high rpms and my boost controller not too good at holding the boost. HP fell off some at 6k cause my tune was too rich, then hit peak HP around 6500 where it was tuned good 11.2 afr.
Another interesting thing is I made 386 ft/lbs torque, and the bnrs made 426 HP but just 365 ft/lbs torque.
I'm thinking about getting the bnrs and I could make a good bit more power with them probably and run closer to mid 10s I think.
Another interesting thing is I made 386 ft/lbs torque, and the bnrs made 426 HP but just 365 ft/lbs torque.
I'm thinking about getting the bnrs and I could make a good bit more power with them probably and run closer to mid 10s I think.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
matty
3rd Generation Specific (1993-2002)
40
10-06-15 09:13 PM