Tuned by Steve Kan
#1
The Power of 1.3
Thread Starter
Join Date: Aug 2001
Location: Shrewsbury, Massachusetts
Posts: 2,837
Likes: 0
Received 0 Likes
on
0 Posts
Tuned by Steve Kan
Last night thanks to CCarlisi, I got tuned by Steve Kan. He's doing a bunch more cars today, but I thought I'd share my results.
First of all, I want to say that Steve is an awesome guy. It doesn't even need to be said that he is an awesome tuner, but he's just a great guy. He took the time to explain what he was doing to the rookies in the group (i.e. me) and answered all my questions. Not to mention that he flew up from Texas to tune. Thanks a bunch Steve!
Anyway, the car was on the dyno under Steves watchful eye for about 2 hours. He did some 7 psi pulls, some 10 psi pulls, and some 12 psi pulls. He also did a few part throttle no boost pulls (which made a whopping 105 hp!) to tune driveability. The results:
At 10 psi the car made 237.1 hp and 213.1 ft.lbs of torque
And at 12 psi it made 260.2 hp and 228.3 ft lbs.
This dyno chart shows the top three pulls at 7,10, and 12 psi. (from top, 10,7,12)
http://images.fotopic.net/?id=136241...ze=1&nostamp=1
And this one is the 12 psi only chart
http://images.fotopic.net/?id=136241...ze=1&nostamp=1
So, whataya think? Mods in sig.
First of all, I want to say that Steve is an awesome guy. It doesn't even need to be said that he is an awesome tuner, but he's just a great guy. He took the time to explain what he was doing to the rookies in the group (i.e. me) and answered all my questions. Not to mention that he flew up from Texas to tune. Thanks a bunch Steve!
Anyway, the car was on the dyno under Steves watchful eye for about 2 hours. He did some 7 psi pulls, some 10 psi pulls, and some 12 psi pulls. He also did a few part throttle no boost pulls (which made a whopping 105 hp!) to tune driveability. The results:
At 10 psi the car made 237.1 hp and 213.1 ft.lbs of torque
And at 12 psi it made 260.2 hp and 228.3 ft lbs.
This dyno chart shows the top three pulls at 7,10, and 12 psi. (from top, 10,7,12)
http://images.fotopic.net/?id=136241...ze=1&nostamp=1
And this one is the 12 psi only chart
http://images.fotopic.net/?id=136241...ze=1&nostamp=1
So, whataya think? Mods in sig.
#6
The Power of 1.3
Thread Starter
Join Date: Aug 2001
Location: Shrewsbury, Massachusetts
Posts: 2,837
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Tim Benton
It's nice to see what A/F Steve tunes for, although I am wondering why he stayed in the tens. Did you tell him to make conservative power with a nice safe area?
Tim
It's nice to see what A/F Steve tunes for, although I am wondering why he stayed in the tens. Did you tell him to make conservative power with a nice safe area?
Tim
And thanks for the compliments everyone. I was impressed with the numbers, having only dp, intake, pfc. KDR makes a good motor!
#7
The Power of 1.3
Thread Starter
Join Date: Aug 2001
Location: Shrewsbury, Massachusetts
Posts: 2,837
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by cpa7man
No catback????
Of course my car is stock except for downpipe.
Steve is awesome.
No catback????
Of course my car is stock except for downpipe.
Steve is awesome.
Trending Topics
#13
Racing is life!
iTrader: (2)
Join Date: Jan 2003
Location: Grapevine, TX
Posts: 2,173
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by 911GT2
but cat-back is soon to come (RB dual tip).
but cat-back is soon to come (RB dual tip).
#14
Lives on the Forum
Join Date: Dec 2001
Location: San Lorenzo, California
Posts: 14,716
Likes: 0
Received 8 Likes
on
8 Posts
Very nice smooth powerband. It looks like nice conservative fuel tuning. Do you know what kinds of changes he made to your ignition timing, if any? How does the car drive around town?
The more I hear about Steve Kan, the more I want my car tuned by him.
The more I hear about Steve Kan, the more I want my car tuned by him.
#15
The Power of 1.3
Thread Starter
Join Date: Aug 2001
Location: Shrewsbury, Massachusetts
Posts: 2,837
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by GsrSol
For intake and dp at 10.8 a/f that's pretty damn good. Is your motor ported or just rebuilt?
For intake and dp at 10.8 a/f that's pretty damn good. Is your motor ported or just rebuilt?
Originally posted by cpa7man
I think were fixin to have a group buy on RB duals. See thread in this section. I'm in. If my engine dosent go out first.
I think were fixin to have a group buy on RB duals. See thread in this section. I'm in. If my engine dosent go out first.
Originally posted by rynberg
Very nice smooth powerband. It looks like nice conservative fuel tuning. Do you know what kinds of changes he made to your ignition timing, if any? How does the car drive around town?
The more I hear about Steve Kan, the more I want my car tuned by him.
Very nice smooth powerband. It looks like nice conservative fuel tuning. Do you know what kinds of changes he made to your ignition timing, if any? How does the car drive around town?
The more I hear about Steve Kan, the more I want my car tuned by him.
If you tell me where to look, and what to look for, I can tell you whether or not he made changes. But I'm a total newb when it comes to the Power FC. So walk me through it.
#17
DragonFly
iTrader: (2)
Had mine tuned by steve too, same mods basically but i have a cat back, so cb, dp, intake, pfc on mine....and I had him tuned as if i was going to install a medium IC...he got about the same results, like 260-270 hp with a conservative afr...he is good, and excellent to deal with.
#19
The Power of 1.3
Thread Starter
Join Date: Aug 2001
Location: Shrewsbury, Massachusetts
Posts: 2,837
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by damian
Had mine tuned by steve too, same mods basically but i have a cat back, so cb, dp, intake, pfc on mine....and I had him tuned as if i was going to install a medium IC...he got about the same results, like 260-270 hp with a conservative afr...he is good, and excellent to deal with.
Had mine tuned by steve too, same mods basically but i have a cat back, so cb, dp, intake, pfc on mine....and I had him tuned as if i was going to install a medium IC...he got about the same results, like 260-270 hp with a conservative afr...he is good, and excellent to deal with.
#21
Eats, Sleeps, Dreams Rotary
Join Date: Aug 2002
Location: Dallas, TX
Posts: 3,119
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by 911GT2
Motor is just rebuilt. I wanted it ported, and I swear I told the good folks at KDR that, but it isn't.
Motor is just rebuilt. I wanted it ported, and I swear I told the good folks at KDR that, but it isn't.
Exhaust ports were left untouched.
#22
The Power of 1.3
Thread Starter
Join Date: Aug 2001
Location: Shrewsbury, Massachusetts
Posts: 2,837
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by cavellm
I saw a KDR "street port", if you could call it that. Looked like someone did it left handed and blindfolded!@
Exhaust ports were left untouched.
I saw a KDR "street port", if you could call it that. Looked like someone did it left handed and blindfolded!@
Exhaust ports were left untouched.
#24
Eats, Sleeps, Dreams Rotary
iTrader: (10)
Just had mine tuned by Steve last weekend here in Phoenix. Car drives far better than it ever has. Since we only have 91 octane here in AZ, he tunes to 10.8. In states with 93 octane he'll tune from 11.1 to 11.3.
It was truly awesome to watch him tune for driveability on the dyno. He takes the car through the rpm range in 500 rpm increments. You can actually hear the car improving as he's making changes at each condition. Kinda like watching a world-class rotary surgeon. Great guy and awesome results. Very happy I had it done!!
It was truly awesome to watch him tune for driveability on the dyno. He takes the car through the rpm range in 500 rpm increments. You can actually hear the car improving as he's making changes at each condition. Kinda like watching a world-class rotary surgeon. Great guy and awesome results. Very happy I had it done!!
#25
Eats, Sleeps, Dreams Rotary
iTrader: (10)
Just had mine tuned by Steve last weekend here in Phoenix. Car drives far better than it ever has. Since we only have 91 octane here in AZ, he tunes to 10.8. In states with 93 octane he'll tune from 11.1 to 11.3.
It was truly awesome to watch him tune for driveability on the dyno. He takes the car through the rpm range in 500 rpm increments. You can actually hear the car improving as he's making changes at each condition. Kinda like watching a world-class rotary surgeon. Great guy and awesome results. Very happy I had it done!!
It was truly awesome to watch him tune for driveability on the dyno. He takes the car through the rpm range in 500 rpm increments. You can actually hear the car improving as he's making changes at each condition. Kinda like watching a world-class rotary surgeon. Great guy and awesome results. Very happy I had it done!!