stock ECU intake/exhaust dyno
#1
Rotary Enthusiast
Thread Starter
iTrader: (9)
Join Date: Sep 2006
Location: Nashville, TN
Posts: 1,003
Likes: 0
Received 0 Likes
on
0 Posts
stock ECU intake/exhaust dyno
my mods are:
custom downpipe
hiflow cat
custom gay/ugly catback
apexi intakes
full non-sequential mod
airpump eliminator pulleys
removed double throttle
stock reman with ~30k miles
blue pull was 8psi
green pull was 10psi
red pull was 10psi
^not sure why last pull was lean til 5000rpms, but it made the peak power number after the AFR's dropped back down.
first pull, 8psi: 230whp/199wtq
second pull, 10psi: 260whp/212wtq
third pull, 10psi: 264whp/232wtq
i let the engine cool off for about 15 minutes with the huge dyno fan on it before i did the third pull, for some reason it was too lean, but thats why the torque numbers are higher...
https://www.rx7club.com/attachment.p...hmentid=217147
https://www.rx7club.com/attachment.p...hmentid=217148
EDIT: this is jacobcartmill btw
custom downpipe
hiflow cat
custom gay/ugly catback
apexi intakes
full non-sequential mod
airpump eliminator pulleys
removed double throttle
stock reman with ~30k miles
blue pull was 8psi
green pull was 10psi
red pull was 10psi
^not sure why last pull was lean til 5000rpms, but it made the peak power number after the AFR's dropped back down.
first pull, 8psi: 230whp/199wtq
second pull, 10psi: 260whp/212wtq
third pull, 10psi: 264whp/232wtq
i let the engine cool off for about 15 minutes with the huge dyno fan on it before i did the third pull, for some reason it was too lean, but thats why the torque numbers are higher...
https://www.rx7club.com/attachment.p...hmentid=217147
https://www.rx7club.com/attachment.p...hmentid=217148
EDIT: this is jacobcartmill btw
Thread
Thread Starter
Forum
Replies
Last Post