View Poll Results: How much wheel HP does you FD put down?
0 My FD is down.
37
11.38%
200 -> 250
37
11.38%
251 -> 300
68
20.92%
301 -> 350
63
19.38%
351 -> 400
39
12.00%
401 -> 500
45
13.85%
501 -> or more
36
11.08%
Voters: 325. You may not vote on this poll
How much RWHP does your FD put down?
#54
Eats, Sleeps, Dreams Rotary
Thread Starter
Originally posted by jpandes
Not enough...316 rwhp & 260 ft/lbs. @ 14.2 psi
Not enough...316 rwhp & 260 ft/lbs. @ 14.2 psi
Dave
#57
www.mancavecolorado.com
Dyno'ed at 406 rwhp yesterday but a/f ratio was at about 15 to 1....trying to fix now. 93 3rd gen with mild street port, power fc, exhaust, fact twins (non- seq). It was boosting at 15.1 lbs.
#58
Lives on the Forum
https://www.rx7club.com/showthread.p...85#post3226585
Originally posted by rynberg
What happened, Manny?
What happened, Manny?
#59
Lives on the Forum
Join Date: Dec 2001
Location: San Lorenzo, California
Posts: 14,716
Likes: 0
Received 8 Likes
on
8 Posts
Originally posted by SleepR1
https://www.rx7club.com/showthread.p...85#post3226585
https://www.rx7club.com/showthread.p...85#post3226585
#61
Eats, Sleeps, Dreams Rotary
Thread Starter
I have alwasy wondered how shops that build engines can actually give a warranty. This whole performance rotary thing operates on such a thin line. One little vac hose resting on an exhaust and burning through, stuck wastegate, faulty boost controler, crappy rebuild, etc. I really don't know how they warranty an engine that gets stuck in a car with people who are driving the **** out of.
#62
Mr. Links
iTrader: (1)
Originally Posted by apneablue
I have alwasy wondered how shops that build engines can actually give a warranty. This whole performance rotary thing operates on such a thin line. One little vac hose resting on an exhaust and burning through, stuck wastegate, faulty boost controler, crappy rebuild, etc. I really don't know how they warranty an engine that gets stuck in a car with people who are driving the **** out of.
That's why these warranties can be misleading.
#66
Rotary Enthusiast
Join Date: Feb 2001
Location: Union, NJ
Posts: 867
Likes: 0
Received 0 Likes
on
0 Posts
Let me see......
126mph in the 1/4 with smaller turbo......and now 103.6mph in the 1/8th w/bigger turbo.....i would say between 450-500rwh on PUMP GAS (94) :-).
Wait a minute......one mentioned being over 500rwh with 102mph traps........Nah!!!
<406rwhp & 331tq (6-24-04) T61, stock ports, 15.93 psi >
Fastrx7man: how do you get such precise boost readings ????
126mph in the 1/4 with smaller turbo......and now 103.6mph in the 1/8th w/bigger turbo.....i would say between 450-500rwh on PUMP GAS (94) :-).
Wait a minute......one mentioned being over 500rwh with 102mph traps........Nah!!!
<406rwhp & 331tq (6-24-04) T61, stock ports, 15.93 psi >
Fastrx7man: how do you get such precise boost readings ????
#69
Rotary Enthusiast
Join Date: Feb 2001
Location: Union, NJ
Posts: 867
Likes: 0
Received 0 Likes
on
0 Posts
<1.12 readout times 14.22 equals 15.9264 psi.>
Oh no.... I was afraid of that.
Do you realize the PowerFC is off by easily 1.0-1.5psi at the boost ???
1.12kg on PowerFC is ~17psi....I tested at least 5 ECUs with very close results.
FYI:
Psi = Kg/cm2
5 = ~.31
10 = ~.65
15 = ~.98-.99
16 = ~1.06
17 = ~1.12-1.13
17.5 = ~ 1.15 (max)
By the way.....good luck on your 10 sec pass......almost there.
Nice to see such clean car run hard!!!
Oh no.... I was afraid of that.
Do you realize the PowerFC is off by easily 1.0-1.5psi at the boost ???
1.12kg on PowerFC is ~17psi....I tested at least 5 ECUs with very close results.
FYI:
Psi = Kg/cm2
5 = ~.31
10 = ~.65
15 = ~.98-.99
16 = ~1.06
17 = ~1.12-1.13
17.5 = ~ 1.15 (max)
By the way.....good luck on your 10 sec pass......almost there.
Nice to see such clean car run hard!!!
#70
Looking for 10's
iTrader: (63)
Originally Posted by Boostn7
<1.12 readout times 14.22 equals 15.9264 psi.>
Oh no.... I was afraid of that.
Do you realize the PowerFC is off by easily 1.0-1.5psi at the boost ???
1.12kg on PowerFC is ~17psi....I tested at least 5 ECUs with very close results.
FYI:
Psi = Kg/cm2
5 = ~.31
10 = ~.65
15 = ~.98-.99
16 = ~1.06
17 = ~1.12-1.13
17.5 = ~ 1.15 (max)
By the way.....good luck on your 10 sec pass......almost there.
Nice to see such clean car run hard!!!
Oh no.... I was afraid of that.
Do you realize the PowerFC is off by easily 1.0-1.5psi at the boost ???
1.12kg on PowerFC is ~17psi....I tested at least 5 ECUs with very close results.
FYI:
Psi = Kg/cm2
5 = ~.31
10 = ~.65
15 = ~.98-.99
16 = ~1.06
17 = ~1.12-1.13
17.5 = ~ 1.15 (max)
By the way.....good luck on your 10 sec pass......almost there.
Nice to see such clean car run hard!!!
It's going to be even cleaner by the end of this weekend
#71
Eats, Sleeps, Dreams Rotary
Thread Starter
Originally Posted by fastrx7man
...... There are several people who have posted that there PFC reports higher boost than they are acctually running........
#74
Jason from rx7 store tuned my FD too! 333RWHP@12psi 300 torque
Power FC, 3" dp/mp, apexi gt spec exaust, apexi intakes, greddy pullys with removed air pump, walbro 255
Power FC, 3" dp/mp, apexi gt spec exaust, apexi intakes, greddy pullys with removed air pump, walbro 255