View Poll Results: How much wheel HP does you FD put down?
0 My FD is down.
37
11.38%
200 -> 250
37
11.38%
251 -> 300
68
20.92%
301 -> 350
63
19.38%
351 -> 400
39
12.00%
401 -> 500
45
13.85%
501 -> or more
36
11.08%
Voters: 325. You may not vote on this poll
How much RWHP does your FD put down?
How much RWHP does your FD put down?
Lives on the Forum
Joined: Sep 2001
Posts: 6,131
Likes: 2
From: IN
Dyno Graph
In case you haven't seen my dyno graph before:
http://board.motorsportsdrivingclub....?s=&postid=564
http://board.motorsportsdrivingclub....?s=&postid=564
Originally posted by SleepR1
370 rwhp, 16 psi, 35 C AIT, 55 F ambient temp.
370 rwhp, 16 psi, 35 C AIT, 55 F ambient temp.
Trending Topics
Rotary Enthusiast
Joined: Mar 2001
Posts: 1,283
Likes: 4
From: ATL, GA U.S.
Dude, I hate to say this but you need some serious tuning. Your power band looks like a poorly tuned single. It doesn't reach stock power level until after 4500 rpm and only stays above stock power level for 1500 rpm range? I sincerely hope that's a before graph.
Originally posted by Trexthe3rd
Dude, I hate to say this but you need some serious tuning. Your power band looks like a poorly tuned single. It doesn't reach stock power level until after 4500 rpm and only stays above stock power level for 1500 rpm range? I sincerely hope that's a before graph.
Dude, I hate to say this but you need some serious tuning. Your power band looks like a poorly tuned single. It doesn't reach stock power level until after 4500 rpm and only stays above stock power level for 1500 rpm range? I sincerely hope that's a before graph.
steve prew
Jinx
Joined: Mar 2001
Posts: 1,260
Likes: 1
From: Raleigh, NC
Originally posted by prew
idk what to tell ya. the car is tuned. its fast as hell. ran a 13.3 @ 111mph with a terrible launch, my first pass ever drag racing anything a few nights ago. it was tuned by a professional.
steve prew
idk what to tell ya. the car is tuned. its fast as hell. ran a 13.3 @ 111mph with a terrible launch, my first pass ever drag racing anything a few nights ago. it was tuned by a professional.
steve prew
Originally posted by technonovice
What are your mods?
What are your mods?
New Turbos
Bonez Downpipe
Silicone Vacuum Lines
Apex Dual N1 Exhaust
Intake with polished hardpipes
Greddy FMIC
Greddy Elbow
Koyo Radiator
Microtech ECU
Turbo XS Boost Controller
if anyone has any other questions about my tuning or mods please pm me. sorry for jacking the thread.
Last edited by prew; May 18, 2004 at 12:12 AM.
340 rwhp
It would be helpful if people listed their mods and if possible their 1/4 mile
Ive got downpipe, midpipe, catback, denso pump, intake, power FC, airpump removed.
Was tuned by Jason@ RX-7 store and makes 12-13 PSI.
It would be helpful if people listed their mods and if possible their 1/4 mile
Ive got downpipe, midpipe, catback, denso pump, intake, power FC, airpump removed.
Was tuned by Jason@ RX-7 store and makes 12-13 PSI.
Last edited by Rx-7Addict; May 18, 2004 at 12:15 AM.
No Cup Holder Racing
Joined: Apr 2002
Posts: 1,446
Likes: 0
From: Bay Area
I voted for 250-300 rwhp. with dp/cb/pfc I put down 242rwhp. i've since added IC and intake. so it hink i should be at least 250 rwhp. this is around ~10/11 PSI.
this was the 242 run. damn heat soak!!!
http://www.tinou.com/fd3s/misc/dyno.jpg
this was the 242 run. damn heat soak!!!
http://www.tinou.com/fd3s/misc/dyno.jpg
Last edited by ttb; May 18, 2004 at 12:46 AM.
Hey, where did my $$$ go?
Joined: Feb 2001
Posts: 4,413
Likes: 0
From: Bimingham, AL
I voted in the 400-500rw section
All the bolt ones with a custom IC, 850/1200's, Walbro, PFC, BNR stage 3's, tuning by Steve Kan. 412rwhp with a nice wide fat *** power curve. 17 or so psi on 93 octane
traps 125mph on 93 octane
STEPHEN
All the bolt ones with a custom IC, 850/1200's, Walbro, PFC, BNR stage 3's, tuning by Steve Kan. 412rwhp with a nice wide fat *** power curve. 17 or so psi on 93 octane
traps 125mph on 93 octane
STEPHEN
1JZ powered
Joined: Jul 2001
Posts: 4,423
Likes: 0
From: Where there's only two seasons, hot and wet! I love Okinawa
Mods? ****, too many of them to list....guess I'll try
HKS T-45S 19 psi on 95 octane and Water Injection, 13B-REW ported to Cosmo 13B inlet size, Border 4 core FMIC, Border 90mm exhaust, 550/1680cc with 2 X walboro pumps, Cosmo 13b UIM/LIM, Cosmo 20B Throttle body, Power FC/3Bar Map/Datalogit/Boost control kit....blah, blah, blah...
Dyno within the next month....gotta stop freakin raining so I can tune. Somewhere over 400~ rwhp
HKS T-45S 19 psi on 95 octane and Water Injection, 13B-REW ported to Cosmo 13B inlet size, Border 4 core FMIC, Border 90mm exhaust, 550/1680cc with 2 X walboro pumps, Cosmo 13b UIM/LIM, Cosmo 20B Throttle body, Power FC/3Bar Map/Datalogit/Boost control kit....blah, blah, blah...
Dyno within the next month....gotta stop freakin raining so I can tune. Somewhere over 400~ rwhp
