99 spec bumper & wheels, Fikse, RB sway,black interior, stock parts (37K) & MORE
12-24-10, 10:04 PM
#1
99 spec bumper & wheels, Fikse, RB sway,black interior, stock parts (37K) & MORE
Pricing alot of this stuff to move... Can deliver between Virginia Beach and DC.
Using the test forum to preview the post...
99 spec front- NEW- OEM skin, lighs, lip, and rebar - $1,920 at rx7 store, $1,500 Pick-up serious buyer takes preference over buyer wanting crating/shipping.
99 spec lights- great shape $625 at rx7 store$400 plus lights whit no broken tabs
99 spec wheels, have efini center caps $1,300 at FDNewbies shop- $750
RB sway bar - $350 Will need a new set of rod ends. I ordered these http://www.improvedracing.com/produc...3bc3c05ea97980 but cant find them. If I can $400 for both or
- $350 for just the bar and the sloppy ends
Mazda Competition sway bar mounts- $140
RX7 store high flow cat $325 new - $175
Fikse Mach V - 17 inch no tires, These had the black centers but its worn with age. Going to drop off at the metal finishers and get them full polished. $1900
Stock parts off a 37K car I parted:
93 tranny- Only drove it around the block to check, didn't hear any grind. Previous owner said it was fine $220
Complete motor that I tore apart. Was rebuilt by kevin Landers 3k before i purchased the car. Compression was 110 and 85 with three equal pulses. Didn't feel Like shipping it so I pulled it apart to sell the housings & irons. Make offer I need my work bench back... No chipping or cracking in the housings. Irons pas the finger nail test. Prefer pick up and inspection
Din Pocket in good shape, 93 finish $75
93 stock shift *** in great shape $50
Powder-coated alternator w/ 37k - $100
Coils w harness 37K with spark plug wires with 3k- $100
AC compressor, condensor and all lines except those connecting to the firewall - $125
Powder-coated Waterpump, UIM, LIM, TB, and PS bracket and pump - Includes clock off plates $350
Motor mounts and brackets form the subframe - $50
Ignitor - $50
TPS - $50
Driveshafts - $50[/B]
MAP sensor w/ 37K - $65
Map sensor w/ 103K - $50
Clutch Master clutch - $50
Rear seat- Does not include side panels, belts or anything else, just the buckets and the back - $150, tear at the seams will provide pics.
Black Quarter panels and divider for use with the bins NOT the seats- great shape & cheap - $250
Black seats with 37K that have Minimal wear - $700
Black Seat with new covers - $600
Black seats with 103K miles that are so, so - $200
I'm sure I'll find more stuff along he way...
Din Pocket in good shape, 93 finish $75
93 stock shift *** in great shape $50
[/QUOTE]
Coils w harness 37K with spark plug wires with 3k- $100
Black Quarter panels and divider for use with the bins NOT the seats- great shape & cheap - $250
Using the test forum to preview the post...
99 spec front- NEW- OEM skin, lighs, lip, and rebar - $1,920 at rx7 store, $1,500 Pick-up serious buyer takes preference over buyer wanting crating/shipping.
99 spec lights- great shape $625 at rx7 store$400 plus lights whit no broken tabs
99 spec wheels, have efini center caps $1,300 at FDNewbies shop- $750
RB sway bar - $350 Will need a new set of rod ends. I ordered these http://www.improvedracing.com/produc...3bc3c05ea97980 but cant find them. If I can $400 for both or
- $350 for just the bar and the sloppy ends
Mazda Competition sway bar mounts- $140
RX7 store high flow cat $325 new - $175
Fikse Mach V - 17 inch no tires, These had the black centers but its worn with age. Going to drop off at the metal finishers and get them full polished. $1900
Stock parts off a 37K car I parted:
93 tranny- Only drove it around the block to check, didn't hear any grind. Previous owner said it was fine $220
Complete motor that I tore apart. Was rebuilt by kevin Landers 3k before i purchased the car. Compression was 110 and 85 with three equal pulses. Didn't feel Like shipping it so I pulled it apart to sell the housings & irons. Make offer I need my work bench back... No chipping or cracking in the housings. Irons pas the finger nail test. Prefer pick up and inspection
Din Pocket in good shape, 93 finish $75
93 stock shift *** in great shape $50
Powder-coated alternator w/ 37k - $100
Coils w harness 37K with spark plug wires with 3k- $100
AC compressor, condensor and all lines except those connecting to the firewall - $125
Powder-coated Waterpump, UIM, LIM, TB, and PS bracket and pump - Includes clock off plates $350
Motor mounts and brackets form the subframe - $50
Ignitor - $50
TPS - $50
Driveshafts - $50[/B]
MAP sensor w/ 37K - $65
Map sensor w/ 103K - $50
Clutch Master clutch - $50
Rear seat- Does not include side panels, belts or anything else, just the buckets and the back - $150, tear at the seams will provide pics.
Black Quarter panels and divider for use with the bins NOT the seats- great shape & cheap - $250
Black seats with 37K that have Minimal wear - $700
Black Seat with new covers - $600
Black seats with 103K miles that are so, so - $200
I'm sure I'll find more stuff along he way...
Din Pocket in good shape, 93 finish $75
93 stock shift *** in great shape $50
[/QUOTE]Coils w harness 37K with spark plug wires with 3k- $100
Black Quarter panels and divider for use with the bins NOT the seats- great shape & cheap - $250
01-02-11, 09:03 PM
#5
Pricing alot of this stuff to move... Can deliver between Virginia Beach and DC.
Using the test forum to preview the post...
99 spec front- NEW- OEM skin, lighs, lip, and rebar - $1,920 at rx7 store, $1,500 Pick-up serious buyer takes preference over buyer wanting crating/shipping.
The blue one is mine. The primered one is for sale. You cab see the rebar tucked inside the blue bumper. Its new, mab be willing to sell without the rebar- but prefer to sell as a package....
99 spec lights- great shape $625 at rx7 store$400 plus lights whit no broken tabs.
99 spec wheels, have efini center caps $1,300 at FDNewbies shop- $750
I have pics in the wheels section. Just search my user name...
RB sway bar - $350 Will need a new set of rod ends. I ordered these http://www.improvedracing.com/produc...3bc3c05ea97980 but cant find them. If I can $400 for both or
- $350 for just the bar and the sloppy ends
Mazda Competition sway bar mounts- $140
Bottom left in the above picture
RX7 store high flow cat $325 new - $175
Using the test forum to preview the post...
99 spec front- NEW- OEM skin, lighs, lip, and rebar - $1,920 at rx7 store, $1,500 Pick-up serious buyer takes preference over buyer wanting crating/shipping.
The blue one is mine. The primered one is for sale. You cab see the rebar tucked inside the blue bumper. Its new, mab be willing to sell without the rebar- but prefer to sell as a package....
99 spec lights- great shape $625 at rx7 store$400 plus lights whit no broken tabs.
99 spec wheels, have efini center caps $1,300 at FDNewbies shop- $750
I have pics in the wheels section. Just search my user name...
RB sway bar - $350 Will need a new set of rod ends. I ordered these http://www.improvedracing.com/produc...3bc3c05ea97980 but cant find them. If I can $400 for both or
- $350 for just the bar and the sloppy ends
Mazda Competition sway bar mounts- $140
Bottom left in the above picture
RX7 store high flow cat $325 new - $175
01-02-11, 09:13 PM
#6
Stock parts off a 37K car I parted:
93 tranny- Only drove it around the block to check, didn't hear any grind. Previous owner said it was fine $200
Oil pan brace in above photo $50
Complete motor that I tore apart. Was rebuilt by kevin Landers 3k before i purchased the car. Compression was 110 and 85 with three equal pulses. Didn't feel Like shipping it so I pulled it apart to sell the housings & irons. Make offer I need my work bench back... No chipping or cracking in the housings. Irons pass the finger nail test. Prefer pick up and inspection
Din Pocket in good shape, 93 finish $75
93 stock shift *** in great shape $50
Motor mount and arms $50
Powder-coated alternator w/ 3k - $100
$100
AC compressor, condensor and all lines except those connecting to the firewall - $125
Powder-coated Waterpump, UIM, LIM, TB, t-stat housing, and PS bracket and pump - Includes block off plates $350
See the pic above all the silver stuff is included. Not the the electronic sensors are not included...
Coils w harness 37K with spark plug wires with 3k-
Ignitor - $50
TPS - $50
Driveshafts - $50[/B]
MAP sensor w/ 37K - $65
Clutch Master clutch - $50
PPF - $75
5spd starter w/ 37k - $100
OMP w/ 37K - $50
Rear seat- Does not include side panels, belts or anything else, just the buckets and the back - $150, tear at the seams will provide pics.
Black Quarter panels and divider for use with the bins NOT the seats- great shape & cheap - $250
Black seats with 37K that have Minimal wear - $700
Black Seat with new covers - $600
Black seats with 103K miles that are so, so - $200
Black Quarter panels and divider for use with the bins NOT the seats- great shape & cheap - $250
[/QUOTE]
93 tranny- Only drove it around the block to check, didn't hear any grind. Previous owner said it was fine $200
Oil pan brace in above photo $50
Complete motor that I tore apart. Was rebuilt by kevin Landers 3k before i purchased the car. Compression was 110 and 85 with three equal pulses. Didn't feel Like shipping it so I pulled it apart to sell the housings & irons. Make offer I need my work bench back... No chipping or cracking in the housings. Irons pass the finger nail test. Prefer pick up and inspection
Din Pocket in good shape, 93 finish $75
93 stock shift *** in great shape $50
Motor mount and arms $50
Powder-coated alternator w/ 3k - $100
$100
AC compressor, condensor and all lines except those connecting to the firewall - $125
Powder-coated Waterpump, UIM, LIM, TB, t-stat housing, and PS bracket and pump - Includes block off plates $350
See the pic above all the silver stuff is included. Not the the electronic sensors are not included...
Coils w harness 37K with spark plug wires with 3k-
Ignitor - $50
TPS - $50
Driveshafts - $50[/B]
MAP sensor w/ 37K - $65
Clutch Master clutch - $50
PPF - $75
5spd starter w/ 37k - $100
OMP w/ 37K - $50
Rear seat- Does not include side panels, belts or anything else, just the buckets and the back - $150, tear at the seams will provide pics.
Black Quarter panels and divider for use with the bins NOT the seats- great shape & cheap - $250
Black seats with 37K that have Minimal wear - $700
Black Seat with new covers - $600
Black seats with 103K miles that are so, so - $200
Black Quarter panels and divider for use with the bins NOT the seats- great shape & cheap - $250
[/QUOTE]
Thread
Thread Starter
Forum
Replies
Last Post