Work vskf HELP
12-13-15, 09:09 PM
#1
Junior Member
Thread Starter
iTrader: (1)
Join Date: May 2014
Location: Washington
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Work vskf HELP
I bought a set of work vskf and wanted to take them down and clean them really nice but I'm having trouble finding the tool to get the bolts apart. I have a 12 point 8mm bit but it's not seating all the way into bolt and I don't want to be going around buying tools to try to get them out! If anyone has experience with this please help!
12-14-15, 07:02 AM
#3
Take the wheel with you to sears or wherever you buy tools and fit 12pts in there until you get a nice seat. If there's a nut on the back of it, which there should be, then you only need the 12pt to hold it still so you can remove the nut.
12-15-15, 10:15 PM
#4
Junior Member
iTrader: (4)
Join Date: Mar 2010
Location: Poconos PA
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
It's a triple square socket. Check an auto parts store for proper size. Never saw a wheel with a nut on the back. It will be alot of work. Hope your time is worth it.. They will get dirty again.