First off, I apologize if there is already another thread regarding this. I have searched and only found one thread that wasnt too specific.

I have been browsing new wheels for my FD and have found the Work Meisters very appealing. I have a question about what "Disk" would work best on my car. Currently the front and rear brakes are stock but I do plan on upgrading them in the future.

I would like to know..

What disk specs would be good for stock FD brakes and what disk would be good for aftermarket brakes.

The disks offered by Work are..

A disk - Standard
O disk - Deep Rim
L disk - Big Caliper
R disk - Big Caliper (I assume these ones are a huge BBK)

I found another forum member running A disk up front and O disk in rear which makes sense. I would like to know what everyone else has or runs and what disks would be best for a BBK.

Here is a link to the work wheels I am interested in. There is also a sizing chart in the link.

Work Wheels :: Products :: Meister S1 3P

If I was going to get a BBK it would probably be the sakebomb AP racing kit.

FD3S: AP Competition Brake System - SakeBomb Garage LLC
FD3S: Competition Rear Brake System - SakeBomb Garage LLC

Please let me know!

Thank you.
-Andrew

 

Mine are Work Meisters 3 pc 18x9 +48 front (A disk) and 18x10 +40 rears (O disk)

You could PM Sakebomb and ask them their opinion on fitment for their brake kit. I went very conservative on offset. My brakes are stock with slotted rotors added since this pic was taken.