Suspension/Wheels/Tires/Brakes

Wheel weight?

Thread Tools
 
Search this Thread
 
Old 01-25-02, 01:54 PM
  #1  
Opinions are like........

Thread Starter
 
deadRX7Conv's Avatar
 
Join Date: Dec 2001
Location: Prov RI
Posts: 879
Likes: 0
Received 1 Like on 1 Post
Wheel weight?

Anyone know how much the stock 88 to 91 16" turbo/Gtu wheels weigh?

I am tired of losing BBS/Mazda caps and would like to replace the 15's with 16's.

And what size tire is recommended for the 16's? I do not care for the skinny tire(205) that these rx7's come with.
Old 01-25-02, 08:16 PM
  #2  
Rotary Freak

 
Jerk_Racer's Avatar
 
Join Date: Feb 2001
Location: Okinawa, Japan
Posts: 2,149
Likes: 0
Received 0 Likes on 0 Posts
Bad news for you. The stock tire size on the T2/GTUs wheels were 205/55/R16. I forget what their weight is.

jerk_racer@hotmail.com
Old 01-26-02, 03:29 AM
  #3  
Rotary Freak

iTrader: (22)
 
ARD T2's Avatar
 
Join Date: Mar 2001
Location: Silicon Valley, CA.
Posts: 2,775
Received 14 Likes on 12 Posts
The mesh type are around 17 lbs I believe. Pretty light and are 16,7's. You can run a 225/50 in the rear.

Rishie
Old 01-30-02, 01:03 PM
  #4  
Rotary Freak

iTrader: (10)
 
gnx7's Avatar
 
Join Date: Mar 2001
Location: San Francisco, CA
Posts: 2,085
Received 19 Likes on 9 Posts
'87-88 T2 rim is around 24lbs...
'89-91 T2 rim is around 16-17lbs

You can run a 245/50/16 out back BTW. The sidewalls do bulge a bit... but it is a lot of tire. But the 235/16 will work out better for most.

-GNX7
205's up front
245's rear
on '87 T2 rims
Old 01-30-02, 06:43 PM
  #5  
Opinions are like........

Thread Starter
 
deadRX7Conv's Avatar
 
Join Date: Dec 2001
Location: Prov RI
Posts: 879
Likes: 0
Received 1 Like on 1 Post
Thanks,

I found some earlier TII rims but I will wait and continue looking for the 89-91 ones. I do not want to add any more unnecessary weight. I am
trying to make my convertible handle/look better.

When I find them, I will probably use the 225's but it is good to know that wider tires can be fitted.

Anyone out there with pictures of TurboII rims with 225's/235's or 245's tires on them?
Old 01-30-02, 08:21 PM
  #6  
Rotary Freak

iTrader: (22)
 
ARD T2's Avatar
 
Join Date: Mar 2001
Location: Silicon Valley, CA.
Posts: 2,775
Received 14 Likes on 12 Posts
I would just buy the 3rd gen wheel and spacers if that's the case. That would be a really good setup, granted the whole thing would run around $600.00 total. But you're getting a wheel that 15-16 pounds, rounding up of course. They are a lot easier to find.

Rishie




All times are GMT -5. The time now is 11:40 PM.